Weha Forklift Snow Plow Attachment

The Weha Forklift Snow Plow Attachment is a hot-dip-galvanized plow designed for use with a compatible forklift. It can be used for moving snow and cleaning shop floors.

Installation is completed by sliding the forklift forks into the receivers and tightening the bolts onto the receivers. The plow angle can be adjusted to push material straight, to the right or to the left.

Typical Applications

• Moving snow with a compatible forklift
• Cleaning shop floors
• Pushing material straight, right or left

Advantages

• Hot-dip-galvanized construction
• Installs by sliding the forklift forks into the receivers
• Bolts tighten onto the receivers to secure the attachment
• Adjustable for straight, right or left pushing
• Includes a rubber scraper
• Includes anti-slip protections
• Angle adjustment on both sides at 10 or 20 degrees

Specifications

• Brand: Weha
• Product type: Forklift snow plow attachment
• Finish: Hot-dip galvanized
• Length: 59 inches
• Length in millimeters: 1,500 mm
• Width: 27 inches
• Width in millimeters: 675 mm
• Height: 26 inches
• Height in millimeters: 660 mm
• Fork openings: 7.8 x 3.9 inches
• Fork openings in millimeters: 200 x 100 mm
• Angle adjustment: 10 or 20 degrees on both sides

Included Components

• Forklift snow plow attachment
• Rubber scraper
• Anti-slip protections
• Fork-receiver securing bolts

Installation Information

1. Position the compatible forklift forks in line with the attachment receivers.
2. Slide the forks completely into the receivers.
3. Tighten the bolts onto the receivers to secure the attachment.
4. Adjust the plow angle for straight, right or left pushing as needed.

Important Safety Note: Confirm that the forklift forks fit the listed 7.8 x 3.9-inch receiver openings and that the attachment is fully secured before operation. Follow all forklift and attachment operating instructions.

Equipment Note: This listing is for the Weha Forklift Snow Plow Attachment only. A forklift is not included.

Frequently Asked Questions

What is this attachment designed for?

It is designed for moving snow and cleaning shop floors with a compatible forklift.

How does the plow attach to the forklift?

The forks slide into the receivers, and bolts are tightened onto the receivers to secure the attachment.

Can the plow angle be adjusted?

Yes. It can be positioned to push straight, right or left, with 10- or 20-degree angle adjustments on both sides.

What are the overall dimensions?

The plow measures 59 inches long, 27 inches wide and 26 inches high.

What size are the fork openings?

The fork openings measure 7.8 x 3.9 inches, or 200 x 100 mm.

Is a rubber scraper included?

Yes. The supplied product information identifies a rubber scraper as included.

Is the forklift included?

No. This listing is for the snow plow attachment only. A forklift is not included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!