Omega Diamond Miter Base for Blue Ripper G2 and Jr.

Turn your compatible Blue Ripper rail saw into a precision miter cutting system for 45-degree cuts in material up to 3 cm thick.

Make Accurate 45-Degree Miter Cuts with Your Blue Ripper.

The Omega Diamond Miter Base is designed for use with compatible Blue Ripper G2 and Blue Ripper Jr. Rail Saws, allowing fabricators to make 45-degree miter cuts in material up to 3 cm thick with full plunge capability.

The saw mounts rigidly to the miter base using four bolts and two pins, providing a stable setup for precision miter work. When straight cutting is needed, the saw can be quickly and easily removed from the miter base.

Advantages

• Converts compatible Blue Ripper rail saws for 45-degree miter cutting
• Cuts material up to 3 cm thick
• Full plunge cutting capability
• Rigid four-bolt and two-pin mounting system
• Saw can be quickly removed for straight cuts
• Designed for professional stone fabrication

Compatibility

Before purchasing the Miter Base, verify that your Blue Ripper saw was manufactured after the applicable date below:

• Blue Ripper Sr: September 2020
• Blue Ripper Jr: November 2019
• Blue Ripper G2: August 2019

Important: Additional parts are required when mounting a Blue Ripper Sr Rail Saw to the Miter Base.

Specifications

• Product: Omega Diamond Miter Base
• Miter Angle: 45 Degrees
• Maximum Material Thickness: Up to 3 cm
• Cutting Capability: Full Plunge
• Mounting: Four Bolts and Two Pins
• Compatible Saws: Blue Ripper G2, Blue Ripper Jr., and compatible Blue Ripper Sr models

Blue Ripper Sr. Cutting Note

When using a Blue Ripper Sr. Rail Saw with the Miter Base, a new blade is required to achieve a full miter cut through 3 cm material. As the blade wears and its diameter decreases, it may no longer be able to complete the full miter cut.

Why Choose the Omega Diamond Miter Base?

The Omega Diamond Miter Base expands the capabilities of your compatible Blue Ripper rail saw without requiring a dedicated miter saw. Its rigid mounting system provides the stability needed for accurate 45-degree cuts, while the removable design makes it easy to switch back to straight cutting when the job requires it.

For countertop fabricators producing mitered edges and other 45-degree assemblies, the Miter Base provides a practical way to get more versatility from an existing Blue Ripper rail saw.

BB Industries has you covered!

Frequently Asked Questions

Which Blue Ripper saws are compatible with the Miter Base?

The Miter Base is compatible with qualifying Blue Ripper G2, Blue Ripper Jr., and Blue Ripper Sr. Rail Saws. Compatibility depends on the saw's manufacturing date.

How thick of a material can it miter?

The Miter Base is designed for 45-degree miter cuts in material up to 3 cm thick.

Can the saw still be used for straight cuts?

Yes. The saw can be quickly removed from the Miter Base when straight cutting is required.

Does the Blue Ripper Sr. require additional hardware?

Yes. Additional parts are required to mount a Blue Ripper Sr. Rail Saw to the Miter Base.

Are the saw and rails included?

No. Blue Ripper G2 Rail Saws, Blue Ripper Jr. Rail Saws, and rails are sold separately.

How can I verify compatibility?

If you are unsure whether your saw is compatible, contact Omega Diamond at (530) 889-8977 and ask a technician to help verify your saw.