Blue Ripper Miter Master for 2cm–3cm Stone

The Blue Ripper Miter Master is designed to cut both opposing 45° angles simultaneously in a single pass. This creates matching mitered edges while reducing setup time for professional stone fabrication.

Compatible with all Blue Ripper Guide Rails, the Miter Master features dual variable-speed motors that can be adjusted for the material being cut. Its 28 lb. design allows it to be transported between fabrication shops and installation sites.

The Miter Master accepts blades up to 6" and offers full plunge capability through 3cm material. It also features a one-hand water disconnect for faster setup.

Typical Applications

• Waterfall countertop fabrication
• Mitered countertop edges
• Laminated edge fabrication
• Kitchen island fabrication
• Commercial countertop production
• Custom stone fabrication
• On-site installation work
• Professional fabrication-shop production

Advantages

• Cuts both opposing 45° angles simultaneously
• Creates matched mitered edges in a single pass
• Compatible with all Blue Ripper Guide Rails
• Dual variable-speed motors can be adjusted for different materials
• Weighs 28 lbs. for easier transportation
• Accepts blades up to 6"
• One-hand water disconnect supports faster setup
• Full plunge capability through 3cm material
• Helps reduce fabrication time, setup time, and labor

Specifications

• Brand: Blue Ripper
• Product: Miter Master
• Compatible Material Thickness: 2cm–3cm
• Maximum Blade Size: 6"
• Motor Type: Dual variable-speed motors
• Weight: 28 lbs.
• Rail Compatibility: All Blue Ripper Guide Rails
• Water Connection: One-hand quick disconnect
• Cutting Angle: Two opposing 45° angles simultaneously
• Plunge Capability: Through 3cm material

Compatible Materials

• Granite
• Quartz
• Quartzite
• Marble
• Engineered stone
• Porcelain slabs
• Sintered stone

Recommended Blade Sizes

• 2cm Stone: A 5" blade is recommended for optimum cutting performance.
• 3cm Stone: A 6" blade is recommended. A worn 5" blade may leave a slight lip at the bottom of the cut.

Why Choose This Product?

The Blue Ripper Miter Master simplifies miter fabrication by cutting both mating 45° angles at the same time. This design helps improve consistency while reducing the time required to cut each edge separately.

Its compatibility with every Blue Ripper Guide Rail system allows fabricators with existing rails to incorporate the Miter Master into their current setup. The dual variable-speed motors, lightweight design, and full plunge capability support shop production and field-installation work involving 2cm and 3cm stone.

Frequently Asked Questions

What makes the Miter Master different from a standard rail saw?

The Miter Master cuts both opposing 45° miter angles simultaneously instead of requiring each edge to be cut separately.

What material thicknesses can it cut?

It is designed for 2cm and 3cm stone materials.

Will it work with existing Blue Ripper rails?

Yes. The Miter Master is compatible with all Blue Ripper Guide Rails.

What blade size should be used?

A 5" blade is recommended for 2cm material, while a 6" blade is recommended for 3cm material. A worn 5" blade may leave a slight lip when cutting thicker material.

What materials can the Miter Master cut?

It is designed for granite, quartz, quartzite, marble, engineered stone, porcelain slabs, and sintered stone.

Safety Notice: Always read and understand the owner’s manual before operating the Blue Ripper Miter Master. Follow the required training and safe operating procedures to reduce the risk of personal injury or equipment damage.