Wood's Vacuum Lifter Manual DC Tilter (MT8FS10TDC)

The Wood's Vacuum Lifter Manual DC Tilter, model MT8FS10TDC, is designed for handling stone and other high-density materials while maintaining a narrow profile for use between tight vertical storage racks.

The lifter features eight 10-inch lipped vacuum pads, a standard 21 x 77-inch pad spread and a listed load capacity of 1,200 lbs. on smooth, nonporous surfaces. Manual tilt movement allows the load to move through 90 degrees between upright and flat positions.

Typical Applications

• Handling stone and other high-density materials
• Working between tight vertical storage racks
• Moving loads between upright and flat positions
• Handling materials with rough surfaces or irregular shapes

Advantages

• Standard vacuum pad spread of 21 x 77 inches
• Eight 10-inch lipped vacuum pads
• 1,200 lb. listed load capacity on smooth, nonporous surfaces
• Manual 90-degree tilt movement between upright and flat
• Individual shut-offs for all vacuum pads
• Closed-cell foam vacuum pad rings
• Spring-mounted vacuum pads
• Vacuum gauge
• Vacuum line filter
• Nylon slings
• Narrow-profile design for use between vertical storage racks
• Made in the USA

Specifications

• Brand: Wood's
• Model: MT8FS10TDC
• Product type: Manual DC vacuum tilter
• Standard vacuum pad spread: 21 x 77 inches
• Vacuum pads: 8
• Vacuum pad diameter: 10 inches
• Vacuum pad style: Lipped
• Load capacity: 1,200 lbs. on smooth, nonporous surfaces
• Lifter weight: 104 lbs. without power system
• Tilt movement: Manual
• Tilt range: 90 degrees between upright and flat
• Vacuum pad shut-offs: Individual
• Vacuum pad rings: Closed-cell foam
• Vacuum pads: Spring-mounted
• Country of manufacture: USA

Included Features

• Eight 10-inch lipped vacuum pads
• Individual vacuum-pad shut-offs
• Closed-cell foam vacuum pad rings
• Spring-mounted vacuum pads
• Vacuum gauge
• Vacuum line filter
• Nylon slings

Product-Line Information

The supplied body copy also describes a Frame-Mounted AC Power System that mounts power-system components directly on the lifter, eliminates the need for a separately supported power system and maintains a narrow profile for operation between vertical storage racks.

Product Information Note: The product title identifies this specific model as the MT8FS10TDC Manual DC Tilter, while the supplied body copy describes a Frame-Mounted AC Power System. The AC power-system information is therefore not specifically confirmed for this DC model. Confirm the exact DC power-system configuration, voltage, battery requirements and included power components before ordering.

Important Load & Safety Note: The supplied product information lists a load capacity of 1,200 lbs. on smooth, nonporous surfaces. Do not exceed the rated capacity. Material surface condition, vacuum-pad contact and other operating conditions can affect lifting performance.

Material Note: The supplied product information states that these Power-Grip vacuum lifters can handle stone and other high-density materials with rough surfaces or irregular shapes. Confirm suitable vacuum engagement on the specific material before lifting.

Operating Notice: Read and understand the owner's manual before operating the vacuum lifter to help prevent equipment damage or bodily injury.

Frequently Asked Questions

What is the load capacity of the MT8FS10TDC?

The supplied product information lists a load capacity of 1,200 lbs. on smooth, nonporous surfaces.

How many vacuum pads does the lifter have?

It is equipped with eight 10-inch lipped vacuum pads.

What is the standard vacuum pad spread?

The listed standard pad spread is 21 x 77 inches.

Can the lifter tilt a load?

Yes. It provides manual 90-degree movement between upright and flat positions.

How much does the lifter weigh?

The supplied product information lists a weight of 104 lbs. without the power system.

Does each vacuum pad have an individual shut-off?

Yes. Individual shut-offs are provided for all vacuum pads.

What type of power system does this model use?

The product title identifies this model as DC. However, the supplied body copy describes an AC power system, so the exact DC power-system specifications should be confirmed before ordering.

Where is the lifter made?

The supplied product information states that it is made in the USA.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!