Wood's Vacuum Lifter Air-Powered AC Tilter, PT10FS10TAC

The Wood's Vacuum Air-Powered Tilt Lifter is designed to lift and tilt stone slabs for efficient material handling in fabrication environments.

Closed-cell foam vacuum pad rings are designed to help the lifter handle the back side of slabs and other textured stone surfaces, while individual pad shutoff valves allow operators to use only the vacuum pads required for the load.

Typical Applications

• Lifting stone slabs
• Tilting stone slabs between upright and flat positions
• Transporting smooth, nonporous stone surfaces
• Handling the back side of slabs and other textured stone surfaces with the supplied closed-cell foam pad rings

Advantages

• Standard vacuum pad spread: 23 x 74 inches
• Ten 10-inch lipped vacuum pads
• Load capacity: 1,500 lbs. on smooth, nonporous surfaces
• 10-second listed vacuum apply time
• 3-second listed release time
• Powered 90-degree tilt movement between upright and flat positions
• 90-degree tilt in 8 seconds
• Individual shutoffs for all vacuum pads
• Closed-cell foam vacuum pad rings
• Spring-mounted vacuum pads
• Blow-off system for quick release

Specifications

• Brand: Wood's
• Product type: Vacuum slab lifter with powered tilt
• Model listed in product title: PT10FS10TAC
• Power configuration listed: Air-powered AC tilter
• Load capacity: 1,500 lbs. on smooth, nonporous surfaces
• Vacuum pad quantity: 10
• Vacuum pad diameter: 10 inches
• Vacuum pad type: Lipped
• Standard vacuum pad spread: 23 x 74 inches
• Vacuum apply time: 10 seconds
• Release time: 3 seconds
• Tilt movement: 90 degrees between upright and flat
• 90-degree tilt time: 8 seconds
• Country of manufacture: USA

Included Features

• Vacuum gauge
• Vacuum reserve tank
• Vacuum line filter
• Spring-mounted vacuum pads
• Individual shutoffs for all vacuum pads
• Closed-cell foam vacuum pad rings
• Blow-off system for quick release

Product Information Note: The product title identifies the model as PT10FS10TAC, while the supplied body copy refers to model PT10HV11. Confirm the exact model designation and configuration before ordering.

Important Safety Note: Read and understand the owner's manual before operating this equipment. Do not exceed the listed 1,500 lb. load capacity, which applies to smooth, nonporous surfaces. Follow all manufacturer operating, inspection and lifting procedures to reduce the risk of equipment damage or bodily injury.

Frequently Asked Questions

What is the listed load capacity?

The lifter is rated for 1,500 lbs. on smooth, nonporous surfaces.

How many vacuum pads does it use?

The supplied product information lists ten 10-inch lipped vacuum pads.

How far can the lifter tilt?

It provides powered 90-degree movement between upright and flat positions.

How quickly does the lifter tilt 90 degrees?

The supplied product information lists an 8-second tilt time for 90-degree movement.

Can individual vacuum pads be shut off?

Yes. Individual shutoff valves allow each vacuum pad to be controlled separately.

Can it handle textured stone surfaces?

The supplied product information states that its closed-cell foam pad rings allow it to pick up the back side of slabs and other textured stone surfaces. Confirm suitability for the specific surface before lifting.

Where is this vacuum lifter made?

The supplied product information states that it is made in the USA.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!