Wood's Power Vacuum Lifter, Air-Powered, PT1010TAIR

The Wood's PT1010TAIR Power Vacuum Lifter is an air-powered material-handling system designed for transporting stone slabs efficiently.

Closed-cell foam vacuum pad rings are designed to help handle the back side of slabs and other textured stone surfaces, while individual pad shutoff valves allow operators to use only the vacuum pads needed for the load.

Typical Applications

• Lifting and transporting stone slabs
• Handling smooth, nonporous stone surfaces
• Handling the back side of slabs and other textured stone surfaces with the supplied closed-cell foam pad rings

Advantages

• Standard vacuum pad spread: 23 x 74 inches
• Ten 10-inch lipped vacuum pads
• Load capacity: 1,500 lbs. on smooth, nonporous surfaces
• 10-second listed vacuum apply time
• 3-second listed release time
• Powered 90-degree tilt movement between upright and flat positions
• 90-degree tilt in 8 seconds
• Individual shutoffs for all vacuum pads
• Closed-cell foam vacuum pad rings
• Spring-mounted vacuum pads
• Blow-off system for quick release

Specifications

• Brand: Wood's
• Model: PT1010TAIR
• Product type: Power vacuum lifter
• Power source: Air-powered
• Load capacity: 1,500 lbs. on smooth, nonporous surfaces
• Vacuum pad quantity: 10
• Vacuum pad diameter: 10 inches
• Vacuum pad type: Lipped
• Standard vacuum pad spread: 23 x 74 inches
• Vacuum apply time: 10 seconds
• Release time: 3 seconds
• Tilt movement listed in supplied description: 90 degrees between upright and flat
• 90-degree tilt time listed: 8 seconds
• Country of manufacture: USA

Included Features

• Vacuum gauge
• Vacuum reserve tank
• Vacuum line filter
• Spring-mounted vacuum pads
• Individual shutoffs for all vacuum pads
• Closed-cell foam vacuum pad rings
• Blow-off system for quick release

Product Information Note: The supplied product title identifies this item as the PT1010TAIR air-powered vacuum lifter. The supplied body copy also lists powered 90-degree tilt movement and an 8-second tilt time. Confirm that these tilt features apply to the exact PT1010TAIR configuration before ordering.

Important Safety Note: Read and understand the owner's manual before operating this equipment. Do not exceed the listed 1,500 lb. load capacity, which applies to smooth, nonporous surfaces. Follow all manufacturer operating, inspection and lifting procedures to reduce the risk of equipment damage or bodily injury.

Frequently Asked Questions

What is the model number?

The listed model is PT1010TAIR.

What is the listed load capacity?

The lifter is rated for 1,500 lbs. on smooth, nonporous surfaces.

How many vacuum pads are included?

The supplied product information lists ten 10-inch lipped vacuum pads.

How quickly does the vacuum apply and release?

The listed apply time is 10 seconds, with a listed release time of 3 seconds.

Can individual vacuum pads be shut off?

Yes. Individual shutoff valves allow the vacuum pads to be controlled separately.

Can it handle textured stone surfaces?

The supplied product information states that the closed-cell foam pad rings allow handling of the back side of slabs and other textured stone surfaces. Confirm suitability for the specific surface before lifting.

Does this model have powered tilt?

The supplied body copy lists powered 90-degree tilt movement and an 8-second tilt time, but these features should be confirmed for the exact PT1010TAIR configuration before ordering.

Where is this vacuum lifter made?

The supplied product information states that it is made in the USA.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!