Weha Yellow Single-Sided A-Frame Storage Rack with Crossbar

The Weha Yellow Single-Sided A-Frame Storage Rack is designed to hold full bundles of both 2 cm and 3 cm stone material while maximizing available shop space. Its single-sided configuration allows the rack to be positioned against a wall near saws, jib cranes and other work areas.

The A-frame has a 6-5/8-inch spread at the top, allowing full-size slabs up to a listed height of 87 inches to be stored before the stone would contact the wall. The rack is painted safety yellow for increased visibility during loading, unloading and shop operations.

Typical Applications

• Storage of full bundles of 2 cm stone
• Storage of full bundles of 3 cm stone
• Wall-side slab storage
• Storage near saws
• Storage near jib cranes
• Storage near fabrication work areas

Advantages

• Single-sided design helps maximize shop space
• Designed to hold full bundles of both 2 cm and 3 cm material
• Includes a 60-inch crossbar that mounts to the A-frames for stability
• Safety yellow finish provides increased visibility
• 6-5/8-inch spread at the top of the A-frame
• Allows slab storage up to a listed height of 87 inches before contacting the wall
• 4-1/4-inch-wide inside C-channel can accommodate wood if preferred

Specifications

• Brand: Weha
• Product type: Single-sided A-frame storage rack
• Color: Safety yellow
• Total base length: 40 inches
• Total height: 59-1/2 inches
• Top spread: 6-5/8 inches
• Maximum slab storage height: 87 inches
• Maximum storage length listed: 20-1/2 inches
• Inside width of C-channel: 4-1/4 inches
• Crossbar spread: 60 inches
• Supported material thicknesses listed: 2 cm and 3 cm

Included Components

• Single-sided A-frame storage rack
• 60-inch crossbar

Product Information Note: The supplied specifications list a maximum storage length of 20-1/2 inches. Confirm this measurement and the required slab dimensions before ordering.

Important Load & Safety Note: A numerical load capacity was not included in the supplied product information. Confirm the applicable load rating, installation requirements and proper slab-storage procedures before loading the rack.

Frequently Asked Questions

Can this rack store both 2 cm and 3 cm slabs?

Yes. The supplied product information states that it is designed to hold full bundles of both 2 cm and 3 cm material.

Can the rack be placed against a wall?

Yes. The single-sided configuration is designed for placement against a wall to help maximize shop space.

What is the maximum listed slab storage height?

The supplied specifications list a maximum slab storage height of 87 inches.

What is the spread at the top of the A-frame?

The listed top spread is 6-5/8 inches.

Is a crossbar included?

Yes. The rack includes a 60-inch crossbar that mounts to the A-frames for stability.

What is the inside width of the C-channel?

The inside width is 4-1/4 inches, allowing wood to be placed inside the channel if preferred.

What is the rack's load capacity?

A numerical load capacity was not included in the supplied product information and should be confirmed before use.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!