Weha Weramic Wet Porcelain Core Bit, 3-1/2-Inch

The Weha Weramic Porcelain Core Bit is designed for drilling large-format porcelain panels, ceramic tile and ultra-compact sintered stone materials. Its thin 2 mm rim is designed to produce clean, fast holes in materials ranging from 6 to 30 mm thick.

This 3-1/2-inch core bit features a 5/8-inch-11 thread and is compatible with materials including Dekton, Lapitec, Neolith and Laminam.

Typical Applications

• Drilling large-format porcelain panels
• Drilling ceramic floor tile
• Drilling ceramic wall tile
• Drilling ultra-compact sintered stone
• Creating holes in materials from 6 to 30 mm thick

Advantages

• Designed for porcelain, ceramic and ultra-compact materials
• Thin 2 mm rim
• According to the supplied product information, produces smooth, chip-free holes
• Designed for fast, clean drilling
• Wet or dry use on material up to 6 mm thick
• Wet use on material thicker than 6 mm
• 5/8-inch-11 thread

Specifications

• Brand: Weha
• Product line: Weramic
• Product type: Porcelain and ceramic core bit
• Diameter: 3-1/2 inches
• Thread: 5/8-inch-11
• Total length: 3-1/8 inches
• Drilling depth: 1-7/8 inches
• Rim thickness: 2 mm
• Recommended operating speed: 1,600-2,800 RPM
• Listed material thicknesses: 6, 8, 10, 12, 20 and 30 mm
• Operating method up to 6 mm: Wet or dry
• Operating method above 6 mm: Wet only

Compatible Materials

• Porcelain panels
• Ceramic tile
• Dekton
• Lapitec
• Neolith
• Laminam
• Other compatible ultra-compact sintered stone materials

Use Note: Although the product title identifies this as a wet core bit, the supplied product information states that it may be used wet or dry on material up to 6 mm thick. Material thicker than 6 mm requires wet use.

Frequently Asked Questions

What materials can this core bit drill?

It is designed for porcelain, ceramic tile and compatible ultra-compact sintered stone materials, including Dekton, Lapitec, Neolith and Laminam.

What size is the core bit?

The core bit has a 3-1/2-inch drilling diameter.

What thread does it use?

It uses a 5/8-inch-11 thread.

Can the bit be used dry?

Yes, on material up to 6 mm thick. The supplied product information requires wet use for material thicker than 6 mm.

What is the recommended operating speed?

The recommended range is 1,600-2,800 RPM.

What is the drilling depth?

The listed drilling depth is 1-7/8 inches.

Is a drill or grinder included?

No. This listing is for the core bit only.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!