Weha Weramic Wet Porcelain Core Bit, 1-3/4-Inch

The Weha Weramic Wet Porcelain Core Bit is designed for drilling clean holes in large-format porcelain panels, ceramic tile and ultra-compact sintered stone materials.

This 1-3/4-inch core bit features a thin, 2 mm rim and a 5/8-inch-11 thread. It can be used wet or dry on materials up to 6 mm thick and must be used wet on materials thicker than 6 mm.

Typical Applications

• Drilling large-format porcelain panels
• Drilling ultra-compact sintered stone
• Drilling ceramic floor tile
• Drilling ceramic wall tile
• Creating holes in material thicknesses from 6 mm to 30 mm

Advantages

• Designed specifically for porcelain panels and ultra-compact sintered stone
• Suitable for compatible ceramic products
• Thin 2 mm rim
• Designed for clean, fast drilling
• According to the supplied product information, produces smooth holes with minimal chipping
• Wet or dry use on materials up to 6 mm thick
• Wet use on materials thicker than 6 mm
• 5/8-inch-11 thread

Specifications

• Brand: Weha
• Product line: Weramic
• Product type: Porcelain and ceramic core bit
• Diameter: 1-3/4 inches
• Thread: 5/8-inch-11
• Total length: 3-1/8 inches
• Drilling depth: 1-7/8 inches
• Rim thickness: 2 mm
• Recommended operating speed: 1,600 to 2,800 RPM
• Wet or dry use: Materials up to 6 mm thick
• Wet-use requirement: Materials thicker than 6 mm

Compatible Materials

• Dekton
• Lapitec
• Neolith
• Laminam
• Large-format porcelain panels
• Ultra-compact sintered stone
• Ceramic floor tile
• Ceramic wall tile
• Other compatible porcelain and ceramic materials

Listed Material Thicknesses

• 6 mm
• 8 mm
• 10 mm
• 12 mm
• 20 mm
• 30 mm

Operating Guidelines

Use the core bit between 1,600 and 2,800 RPM. Wet or dry drilling may be used on materials up to 6 mm thick. Use water when drilling materials thicker than 6 mm.

Wet-Use Requirement: Materials thicker than 6 mm must be drilled wet according to the supplied product information.

Compatibility Note: Confirm that the 1-3/4-inch diameter, 5/8-inch-11 thread, drilling depth and recommended operating speed are compatible with the intended tool and application before use.

Frequently Asked Questions

What is the diameter of this core bit?

This core bit has a 1-3/4-inch diameter.

What materials can it drill?

The supplied product information lists porcelain panels, ceramic tile and ultra-compact sintered stone materials such as Dekton, Lapitec, Neolith and Laminam.

Can the core bit be used dry?

It can be used wet or dry on materials up to 6 mm thick. Materials thicker than 6 mm must be drilled wet.

What is the drilling depth?

The listed drilling depth is 1-7/8 inches.

What thread does the core bit use?

It uses a 5/8-inch-11 thread.

What operating speed is recommended?

The recommended operating range is 1,600 to 2,800 RPM.

Is a drilling tool included?

No. This listing is for the Weha Weramic Core Bit only. A drilling tool and other accessories are not identified as included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!