Weha T-31 Anchor Machine Kit

The Weha T-31 Anchor Machine is designed to cut T-31 anchor slots without requiring the countertop or vanity top to be flipped over.

After the sink opening has been cut and polished, the machine can be positioned inside the bowl and adjusted to the required depth before cutting the anchor slot. According to the supplied product information, this process reduces material handling, saves labor and lowers the risk of damaging the finished top.

The machine can also be operated upside down to cut anchor slots from the top. For countertops fabricated face down on a CNC machine, the slots can be cut while the material remains positioned on the CNC pods.

Typical Applications

• Cutting T-31 anchor slots in countertops
• Cutting anchor slots in vanity tops
• Creating sink and bowl mounting slots
• Cutting slots while material remains on a CNC machine
• Top-side or bowl-side anchor slot cutting

Advantages

• Does not require the stone top to be flipped over for bowl-side slot cutting
• Fits inside the sink or vanity bowl opening
• Slides to the required cutting depth
• Can be operated upside down for top-side slot cutting
• Can cut slots while a face-down top remains on CNC pods
• Reduces countertop handling
• According to the supplied product information, helps reduce labor and the risk of breaking the top
• Does not rely on a vacuum suction plate for the described cutting process

Specifications

• Brand: Weha
• Product: T-31 Anchor Machine Kit
• Product type: Anchor slot cutting machine
• Anchor type: T-31
• Operating positions: Upright or upside down
• Supported workpieces: Countertops and vanity tops
• Compatible workflow: Worktable or CNC pod setup

Operating Method

1. Complete the sink or vanity cutout and polishing process.
2. Position the T-31 Anchor Machine inside the bowl opening.
3. Slide the machine to the required anchor-slot depth.
4. Cut the T-31 anchor slot.

For material positioned face down on CNC pods, the machine can be used upside down to cut the anchor slots before the finished top is removed from the CNC.

Frequently Asked Questions

Does the countertop need to be flipped over?

No. The machine is designed to cut bowl-side anchor slots without flipping the countertop or vanity top.

Can the machine cut slots from the top side?

Yes. The supplied product information states that it can be operated upside down for top-side anchor slot cutting.

Can it be used while a countertop remains on CNC pods?

Yes. A face-down countertop can remain on the CNC pods while the anchor slots are cut.

Does the machine use a vacuum suction plate?

The supplied product information states that the Weha design does not require the vacuum suction method used by many other T-31 anchor machines.

What components are included in the kit?

The exact kit components were not listed in the supplied product information and should be confirmed before ordering.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!