Weha Safety Yellow Granite A-Frame Storage Rack Set with Crossbar

The Weha Safety Yellow Granite A-Frame Storage Rack Set is designed for storing granite, marble, engineered stone, quartz and quartzite slabs. With a total listed capacity of 24,000 lbs., the rack supports up to 12,000 lbs. per side.

The A-frame is painted safety yellow for high visibility during loading, unloading and customer walkthroughs. It comes as a set of two A-frames with a crossbar and required hardware.

Typical Applications

• Storage of granite slabs
• Storage of marble slabs
• Storage of engineered stone slabs
• Storage of quartz slabs
• Storage of quartzite slabs
• Storage of full bundles of 2 cm and 3 cm material

Advantages

• Total listed load capacity of 24,000 lbs.
• 12,000 lb. listed capacity per side
• Designed to hold full bundles of 2 cm and 3 cm material on both sides
• Safety yellow finish provides high visibility
• Wide 4-1/4-inch inside base channel can accommodate a 2 x 4 if preferred
• 6-5/8-inch spread at the top of the A-frame
• Allows storage of full-height slabs on both sides without the slabs touching
• Includes crossbar and hardware
• Ships knocked down for lower freight cost

Specifications

• Brand: Weha
• Product type: A-frame slab storage rack set
• Color: Safety yellow
• Total load capacity: 24,000 lbs.
• Load capacity per side: 12,000 lbs.
• Crossbar spread after mounting: 60 inches
• Total base length: 60 inches
• Total A-frame height: 59-1/2 inches
• Top spread: 6-5/8 inches
• Total slab storage height: 87 inches
• Full-height slab storage listed: At least 85 inches
• Maximum storage length per side listed: 20-1/2 inches
• Inside width of A-frame base: 4-1/4 inches
• Side ledges: 1 inch
• Supported material thicknesses listed: 2 cm and 3 cm
• Shipping configuration: Ships knocked down

Included Components

• 2 A-frames
• Crossbar
• Required hardware

Product Information Note: The supplied specifications list a maximum storage length per side of 20-1/2 inches. Confirm this measurement and the required slab dimensions before ordering.

Important Load & Safety Note: Do not exceed the listed total load capacity of 24,000 lbs. or 12,000 lbs. per side. Properly distribute and secure slab loads and follow applicable stone-storage and material-handling procedures.

Frequently Asked Questions

What is the total load capacity?

The rack set has a listed total capacity of 24,000 lbs., with 12,000 lbs. of capacity per side.

What materials can be stored on this rack?

The supplied product information lists granite, marble, engineered stone, quartz and quartzite.

Can it hold both 2 cm and 3 cm slabs?

Yes. The rack is designed to hold full bundles of both 2 cm and 3 cm material.

What is included with the rack set?

The set includes two A-frames, a crossbar and the required hardware.

What is the crossbar spread once installed?

The listed crossbar spread after mounting to the A-frames is 60 inches.

How high can slabs be stored?

The specifications list a total slab storage height of 87 inches, while the supplied description states that full-height slabs of at least 85 inches can be stored on both sides without touching.

Does the rack ship assembled?

No. The supplied product information states that it ships knocked down for lower freight cost.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!