Product Description
Product Videos
Custom Field
Non-Stock Item Please allow extra time for shipping
Technical Data Sheet 1 https://www.bbindustriesllc.com/content/spec-sheets/82899_data_sheet1.pdf
Trusted by Stone Fabricators
Over 30 Years of Service
Two-Day Delivery
Same-Day Shipping
Expert Support
Since 1994
The Weha PIG 350VS Planetary Polisher is designed specifically for refinishing stone countertops. It can be used to re-polish scratched surfaces, remove an existing polish to create a honed finish and produce leathered finishes on granite, marble and quartzite.
The dual-action planetary system uses three independently spinning heads while the entire polishing body also rotates. This action is designed to produce fast, even results without swirl marks.
The included 6-inch Donkey Package has been tested on granite, quartz and quartzite for honing, scratch removal and complete factory-finish re-polishing.
For in-shop use, the PIG includes a quick-connect water fitting that attaches to a standard garden hose for continuous water flow. An on/off valve allows the operator to control the supply.
For on-site or in-home use, the machine includes a half-gallon water reservoir. Two separate on/off valves allow the operator to control the amount of water dispensed. A removable rubber water skirt helps contain spray from the polishing pads.
The PIG features three polishing heads, each with a standard 5/8-inch-11 thread. It accepts 4-inch, 5-inch and 6-inch polishing pads. With a full 14-inch operating diameter, the manufacturer recommends 6-inch pads for increased diamond-to-surface contact.
What materials can the PIG Planetary Polisher be used on?
The supplied information identifies granite, marble, quartzite and quartz applications.
What finishes can the machine produce?
It is designed for re-polishing, honing, scratch removal and leathering stone countertops.
Can the polisher be used at a jobsite?
Yes. The built-in half-gallon reservoir supports on-site and in-home use without requiring a continuous hose connection.
Can it also be connected to a shop water supply?
Yes. A dedicated quick-connect fitting attaches to a standard garden hose for continuous water flow.
What pad sizes will the machine accept?
The three polishing heads accept 4-inch, 5-inch and 6-inch pads.
What is the operating speed range?
The PIG 350VS has a variable-speed range of 300 to 940 RPM.
Can the machine operate on 110V and 220V power?
Yes. The power system automatically recognizes 110V or 220V input and comes wired with a 110V plug.
Can the PIG be used dry?
Yes. The machine is designed for wet or dry applications.
BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.
BB Industries has you covered!
Sign up for special offers, new product alerts, and helpful content delivered to your inbox.