Weha Copper Core Continuous Rim Ceramic, Porcelain & Stone Blade, 5-Inch

The Weha Copper Core 5-Inch Continuous Rim Diamond Blade is designed for cutting ceramic, porcelain, glass and natural stone tile, including granite, marble, travertine and limestone.

According to the supplied product information, the copper-core design helps draw heat away from the blade to support longer blade life and a clean cut. The blade also uses a special bond designed to cut glass, porcelain and stone with minimal chipping.

Typical Applications

• Cutting ceramic tile
• Cutting porcelain tile
• Cutting glass
• Cutting granite tile
• Cutting marble tile
• Cutting travertine tile
• Cutting limestone tile
• Cutting other natural stone tile

Advantages

• Continuous rim diamond blade
• Copper-core design helps draw heat away from the blade
• Designed for ceramic, porcelain, glass and natural stone tile
• According to the supplied product information, designed to provide a clean cut
• Special bond designed to reduce chipping when cutting glass, porcelain and stone
• 8 mm diamond height

Specifications

• Brand: Weha
• Product type: Continuous rim diamond blade
• Diameter: 5 inches
• Arbor: 22-20 mm
• Diamond height: 8 mm (5/16 inch)
• Blade design: Copper core
• Rim type: Continuous

Compatible Materials

• Ceramic
• Porcelain
• Glass
• Granite
• Marble
• Travertine
• Limestone
• Natural stone tile

Compatibility Note: Confirm that the 5-inch blade diameter and 22-20 mm arbor configuration are compatible with the intended saw or cutting equipment before use. Operating speed and wet/dry requirements were not included in the supplied product information.

Frequently Asked Questions

What size is the Weha Copper Core blade?

The blade has a listed diameter of 5 inches.

What materials can it cut?

The supplied product information lists ceramic, porcelain, glass and natural stone tile, including granite, marble, travertine and limestone.

What type of rim does the blade have?

It uses a continuous rim design.

What is the arbor size?

The supplied product information lists a 22-20 mm arbor.

How tall is the diamond segment?

The listed diamond height is 8 mm, or 5/16 inch.

What is the purpose of the copper-core design?

According to the supplied product information, the copper-core design helps draw heat away from the blade to support blade life and cutting performance.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!