Weha Buffalo Slab Bundle Rack, 10-Foot with 72-Inch Poles

The Weha Buffalo Slab Bundle Rack features 72-inch poles designed to provide additional support for taller stone slabs, including quartz slabs reaching approximately 80 inches in height.

The Buffalo rack uses a patented six-point post-touch locking system that creates six pressure points between the base and pole. According to the supplied product information, this increases metal-to-metal contact from approximately 4-1/2 inches to more than 9-1/2 inches and increases structural strength by 57%.

Typical Applications

• Storage of tall stone slabs and bundles
• Storage of granite
• Storage of marble
• Storage of engineered stone
• Storage of quartz
• Storage of quartzite
• Storage of other natural stone
• Storage of 2 cm and 3 cm stone bundles

Advantages

• 72-inch poles provide additional leverage for taller slabs
• Six-point post-touch locking system
• More than 9-1/2 inches of listed metal-to-metal contact between base and pole
• According to the supplied product information, the locking design increases structural strength by 57%
• 14 receivers per base
• Receivers spaced 8-1/2 inches on center
• 6-inch spacing from hole to hole
• Anchor holes at each end of the bases for securing the rack to the floor when required
• Special lock notches on the poles secure them into the base
• Each pole includes a Weha Signature Safety Angle Bracket
• Each post includes a white rubber cap
• Fully hot-dip galvanized poles

Specifications

• Brand: Weha
• Product line: Buffalo
• Product type: Slab bundle storage rack
• Rack length: 10 feet
• Pole dimensions: 2-3/8 x 2-3/8 x 72 inches
• Pole finish: Fully hot-dip galvanized
• Receivers per base: 14
• Receiver spacing: 8-1/2 inches on center
• Hole spacing: 6 inches from hole to hole
• Post locking system: Six-point post-touch design with lock notches
• Included post protection: White rubber caps
• Included safety feature: Weha Signature Safety Angle Bracket on each pole

Six-Point Post-Touch Locking System

The Buffalo base is designed to contact each pole at six pressure points. The supplied product information states that this design increases metal-to-metal surface contact from a standard 4-1/2 inches to more than 9-1/2 inches.

According to the supplied product information, the patented multi-locking post-to-base design increases structural strength by 57% and is intended to support full bundles of 2 cm and 3 cm stone.

72-Inch Pole Configuration

The 72-inch poles are intended for taller slabs, including quartz slabs that may reach approximately 80 inches in height. The additional pole height provides greater leverage compared with the standard 60-inch pole configuration when storing taller bundles.

Manufacturer Claim Note: The supplied product information describes the patented Buffalo design as providing greater base-to-post surface contact and increased structural strength compared with conventional slab-rack designs.

Important Load & Safety Note: A numerical load capacity was not included in the supplied product information for this 72-inch-pole configuration. Confirm the applicable load rating, anchoring requirements and proper slab-storage procedures before loading the rack.

Frequently Asked Questions

Why use 72-inch poles instead of 60-inch poles?

The supplied product information states that the taller poles provide better leverage for taller slabs, including quartz slabs reaching approximately 80 inches in height.

How many receivers are in each base?

Each base has 14 receivers spaced 8-1/2 inches on center.

What size are the poles?

Each pole measures 2-3/8 x 2-3/8 x 72 inches.

Can the rack be anchored to the floor?

Yes. Anchor holes are located at each end of the bases for securing the rack to the floor when required.

What materials can be stored?

The supplied product information lists granite, marble, engineered stone, quartz, quartzite and other natural stone.

What is the six-point locking system?

The base creates six pressure points against each pole. According to the supplied information, this increases metal-to-metal contact to more than 9-1/2 inches.

What is the rack's load capacity?

A numerical load capacity for this specific 72-inch-pole configuration was not included in the supplied product information and should be confirmed before use.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!