Tenax Skudo Shield Water-Based Sealer, 1 Liter

Tenax Skudo Shield is a ready-to-use, water-based sealer designed to provide stain-resistant protection for glossy and matte surfaces. It penetrates the residual porosity of the material to help block the absorption of dirt and staining liquids.

The low-VOC formula does not create a surface film, allowing treated surfaces to breathe. It is suitable for indoor and outdoor applications and can be used on polished, honed and brushed finishes.

Typical Applications

• Protecting surfaces against dirt and staining liquids
• Indoor sealing applications
• Outdoor sealing applications
• Polished surfaces
• Honed surfaces
• Brushed surfaces
• Glossy and matte finishes

Advantages

• Water- and oil-repellent protection
• Provides stain resistance
• Penetrates the residual porosity of the surface
• Helps block the absorption of dirt and staining liquids
• Does not create a surface film
• Allows treated surfaces to breathe
• Suitable for indoor and outdoor applications
• Low-VOC formula
• Effective on polished, honed and brushed finishes
• Ready to use
• No dilution required
• Simple application process

Specifications

• Brand: Tenax
• Product: Skudo Shield
• Product type: Penetrating sealer
• Formula: Water based
• Container size: 1 liter
• VOC level: Low VOC
• Surface film: None
• Usage location: Indoor and outdoor
• Compatible appearances: Glossy and matte
• Compatible finishes: Polished, honed and brushed
• Dilution required: No
• Application condition: Clean, dry surface
• Absorption time: Approximately 1 to 5 minutes

Application Instructions

1. Make sure the surface is clean and dry.
2. Apply the ready-to-use product with a clean cloth using circular motions.
3. Allow the sealer to absorb for approximately 1 to 5 minutes.
4. Before the surface dries, remove any excess product that has not been absorbed.
5. Test the product on a small, hidden area before treating the entire surface.
6. Close the container lid securely after use.

At temperatures around 30°C, the product may dry quickly, potentially within approximately one minute.

Frequently Asked Questions

What is Tenax Skudo Shield used for?

It is designed to help protect surfaces against dirt, oil, water and staining liquids.

Is Skudo Shield ready to use?

Yes. The product is ready to use and does not require dilution.

Does it form a coating on the surface?

No. It penetrates the surface without creating a surface film.

Can the treated surface breathe?

Yes. The supplied product information states that Skudo Shield allows treated surfaces to breathe.

Can it be used outdoors?

Yes. It is suitable for both indoor and outdoor applications.

What finishes are compatible?

It is effective on polished, honed and brushed finishes, including glossy and matte surfaces.

How long should the product remain on the surface?

Allow it to absorb for approximately 1 to 5 minutes, then remove any excess before the surface dries.

Should the product be tested before application?

Yes. The supplied instructions recommend testing it on a small, hidden area first.

How much sealer is included?

This container includes 1 liter of Tenax Skudo Shield Water-Based Sealer.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!