Tenax Glaxs Polar White

Tenax Glaxs Polar White is a high-adhesion bonding system designed for ceramic, porcelain and similar surfaces. Suitable for indoor and outdoor applications, the VOC-free formula offers excellent color stability when exposed to sunlight.

Glaxs Polar White is pre-dosed for convenient dispensing and cures rapidly. Once applied, it produces a glossy, shiny finish that is easy to polish.

This product requires the special M200XMR Cartridge Gun and includes two mixing nozzles.

Typical Applications

• Indoor bonding applications
• Outdoor bonding applications
• Bonding ceramic surfaces
• Bonding porcelain surfaces
• Bonding similar materials

Advantages

• VOC-free formula
• Excellent adhesion
• Ultra-rapid curing
• Excellent color stability in sunlight
• Glossy, shiny finish
• Easy to polish
• Suitable for indoor and outdoor use
• Pre-dosed for easy dispensing
• Includes two mixing nozzles
• Available in a wide variety of colors

Specifications

• Manufacturer: Tenax
• Product: Glaxs Polar White
• Color: Polar White
• Product type: High-adhesion bonding system
• VOC content: VOC free
• Use: Indoor and outdoor
• Required dispensing tool: M200XMR Cartridge Gun
• Included accessories: Two mixing nozzles
• Minimum setting temperature: Above 1°C
• Shelf life: At least 12 months under specified storage conditions

Compatible Materials

• Ceramic
• Porcelain
• Similar surfaces

Instructions for Use

1. Make sure all surfaces are clean and free of dust and grease.
2. For glossy or smooth surfaces, scrub the bonding area with sandpaper before applying the adhesive.
3. Remove the threaded end and uncap the cartridge.
4. Attach the mixer to the cartridge using the threaded nozzle.
5. Before applying the adhesive, purge approximately 5 grams in a line.
6. Use only Tenax-approved guns: MK Sulzer 2:1 ratio H236M or Mixpac DM200-01 2:1 ratio.
7. After use, clean the nozzle, replace the cap and discard the used mixer.

Important: The product will not set below 1°C.

Storage and Shelf Life

Tenax Glaxs Polar White cartridges have a shelf life of at least 12 months when stored under normal conditions between 18°C and 25°C. Keep the product away from heat sources, humidity and sunlight.

Why Choose Tenax Glaxs Polar White?

Tenax Glaxs Polar White provides professional fabricators and installers with a fast-curing, high-adhesion system for ceramic, porcelain and similar surfaces. Its VOC-free formula, sunlight color stability and polished glossy finish make it suitable for both indoor and outdoor bonding applications.

Frequently Asked Questions

Can Tenax Glaxs Polar White be used outdoors?

Yes. It is designed for both indoor and outdoor bonding applications.

What materials can Glaxs Polar White bond?

It is designed for ceramic, porcelain and similar surfaces.

Which dispensing gun is required?

The product requires the special M200XMR Cartridge Gun. The instructions also specify Tenax-approved MK Sulzer H236M and Mixpac DM200-01 guns with a 2:1 ratio.

How should smooth or glossy surfaces be prepared?

Scrub smooth or glossy surfaces with sandpaper before applying the adhesive.

What is the shelf life of Glaxs Polar White?

The cartridge has a shelf life of at least 12 months when stored between 18°C and 25°C and kept away from heat, humidity and sunlight.

Safety Notice: The resin and hardener are chemical products. Read the safety data sheet and the instructions on the product label before use.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!