RYE-Corp Fab King Work Center

The RYE-Corp Fab King Work Center combines multiple stone-fabrication functions in one machine. It can serve as a router, drill press, inline backsplash polishing machine, top polisher and radial-arm sink cutout machine.

The Fab King operates on 220-volt, single-phase power and uses off-the-shelf components. Its frame is constructed with 4-inch industrial-strength steel square tubing to help maintain rigidity while the motor is under load.

The full-size fabrication bed provides 114 inches of linear travel and 30 inches of gantry travel. According to the supplied product information, the machine can produce template-guided sink cutouts in as little as eight minutes.

Typical Applications

• Template-guided sink cutouts
• Stone edge routing and profiling
• Drilling holes with compatible core bits
• Inline backsplash polishing
• Top polishing
• Surface texturing with compatible antiquing brushes
• Miter and plunge cutting
• Countertop fabrication

Advantages

• Combines several fabrication functions in one work center
• Solid cantilevered frame helps provide a square tooling surface
• 4-inch industrial-strength steel square-tube construction
• Full-size fabrication bed
• 114 inches of linear travel
• 30 inches of gantry travel
• Uses compatible router bits
• Template-guided sink cutting supports consistent dimensions
• Travel head runs horizontally for flat-edge backsplash polishing
• Uses 220-volt, single-phase power
• Built with off-the-shelf components
• Designed for a quick setup process

Specifications

• Brand: RYE-Corp
• Product: Fab King Work Center
• Product type: Multi-function stone fabrication machine
• Power requirement: 220 volts, single phase
• Frame construction: 4-inch industrial-strength steel square tubing
• Linear travel: 114 inches
• Gantry travel: 30 inches
• Supported functions: Routing, drilling, backsplash polishing, top polishing and sink cutouts
• Additional capability: Miter and plunge cutting
• Sink cutting method: Template guided

Compatible Tooling and Accessories

• Compatible router bits
• Compatible core bits
• Viper Diamond Antiquing Brushes
• Viper 3-Step polishing pads
• Sink templates

Tooling, templates and accessories are not identified as included with the machine.

Operating Benefits

• Rigid frame helps reduce deflection during edge profiling
• Template-guided cutting supports repeatable sink dimensions
• Stable drilling action can help reduce core-bit wobble
• Horizontal travel head supports flat-edge backsplash polishing
• Multi-function design can reduce the need for separate machines

Safety Notice

Important: Read and understand the owner's manual before operating the machine to help prevent equipment damage or bodily injury.

Frequently Asked Questions

What functions does the Fab King combine?

It combines the functions of a router, drill press, inline backsplash polishing machine, top polisher and radial-arm sink cutout machine.

What power supply does the machine require?

The Fab King operates on 220-volt, single-phase power.

How much travel does the fabrication bed provide?

The machine provides 114 inches of linear travel and 30 inches of gantry travel.

Can the Fab King produce sink cutouts?

Yes. It uses templates for sink cutouts. According to the supplied product information, some sink cutouts can be completed in as little as eight minutes.

Can the machine polish backsplash edges?

Yes. Its travel head runs horizontally to support flat-edge backsplash polishing.

Are tooling and templates included?

The supplied product information does not identify router bits, core bits, polishing pads, antiquing brushes or sink templates as included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!