Raimondi Zipper 105 Middle Bridge Wet Saw (WSZIP105)

The Raimondi Zipper 105 Middle Bridge Wet Saw is designed for cutting granite, marble, porcelain, single-fired and double-fired tile, brick and cement. It supports straight, 45-degree bevel and plunge cuts.

The saw provides a maximum cutting length of 41-3/8 inches and accommodates blades from 12 to 14 inches in diameter. Its adjustable cutting depth handles material up to 4-3/4 inches thick in a single pass or 9-1/2 inches thick using a double pass.

Typical Applications

• Straight cutting
• 45-degree bevel or Jolly cutting
• Plunge cutting
• Wet cutting granite
• Wet cutting marble
• Wet cutting porcelain
• Cutting single-fired and double-fired tile
• Cutting brick and cement

Advantages

• Maximum cutting length of 41-3/8 inches
• Adjustable cutting depth
• Tilting motor assembly for bevel cuts from 0 to 45 degrees
• Re-adjustable square supports long-term cutting precision
• Pivoting blade guard remains parallel with the tile to maintain cutting depth
• Floating blade guard remains in contact with the tile during operation
• Belt-driven system optimizes motor torque and cutting capacity
• Cast and extruded aluminum framework
• Removable polypropylene water tank simplifies cleaning
• Heavy-duty water pump with two jet nozzles
• Telescopic legs include a safety device to help prevent collapsing
• Pressure device helps hold tile during cutting
• Wheel kit supports easier transport

Specifications

• Brand: Raimondi
• Product line: Zipper
• Model: Zipper 105 Middle Bridge Wet Saw
• Model number: WSZIP105
• Product type: Bridge wet saw
• Maximum cutting length: 41-3/8 inches
• Maximum cutting thickness, single pass: 4-3/4 inches or 120 mm
• Maximum cutting thickness, double pass: 9-1/2 inches or 240 mm
• Maximum blade diameter: 14 inches
• Minimum blade diameter: 12 inches
• Included blade diameter: 14 inches
• Bevel range: 0 to 45 degrees
• Cut types: Straight, bevel and plunge
• Drive system: Belt driven
• Motor-to-blade gear ratio: 1.4:1
• Drive belt type: Poly-V
• Framework: Cast and extruded aluminum
• Water tank material: Polypropylene
• Water tank capacity: 38 liters or 10 gallons
• Water delivery: Heavy-duty pump with two jet nozzles
• Motor housing: Cast aluminum
• Motor assembly pulleys: Four re-adjustable pulleys with double bearings; two are adjustable
• Rail construction: Extruded aluminum
• Leg design: Telescopic with anti-collapse safety device
• Recommended materials: Granite, marble, porcelain, single-fired and double-fired tile, brick and cement

Included Components

• 14-inch segmented diamond blade
• Wheel kit for transport
• Pressure device for holding tile
• Key kit
• Wrench
• Manual

Frequently Asked Questions

What is the maximum cutting length?

The maximum listed cutting length is 41-3/8 inches.

How thick can the saw cut?

It can cut material up to 4-3/4 inches or 120 mm thick in a single pass and up to 9-1/2 inches or 240 mm thick using a double pass.

Can the saw make bevel cuts?

Yes. The motor assembly tilts from 0 to 45 degrees for bevel or Jolly cuts.

What blade sizes can be used?

The saw accommodates blades from 12 to 14 inches in diameter.

What blade is included?

A 14-inch segmented diamond blade is included.

What materials can the saw cut?

The supplied product information identifies granite, marble, porcelain, single-fired and double-fired tile, brick and cement.

How large is the water tank?

The removable polypropylene water tank has a capacity of 38 liters or 10 gallons.

Does the saw include a device for holding tile?

Yes. A pressure device for holding tile is included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!