Raimondi Mistral 120 Wet Tile Saw

The Raimondi Mistral 120 Wet Tile Saw is designed for cutting granite, marble, porcelain, single-fired and double-fired tile, brick and cement materials.

This saw provides a 47-1/4-inch rip-cut capacity, supports plunge cutting and tilts for 45-degree angle cuts. Its removable aluminum workbenches provide a sturdy cutting surface while allowing easier cleanup.

Typical Applications

• Straight tile cutting
• Plunge cutting
• 45-degree angle cutting
• Diagonal cutting of tile up to 33-1/2 x 33-1/2 inches
• Cutting granite and marble
• Cutting porcelain and ceramic tile
• Cutting brick and cement materials

Advantages

• Aluminum sliding bar and blade cover
• Removable aluminum workbenches for easier cleaning
• Adjustable aluminum square
• Coated metal frame
• Plunge-cut capability
• Motor supported by a galvanized metal frame
• Motor travels on four polypropylene pulleys
• Each pulley is reinforced with two internal bearings
• Adjustable pulley system helps reduce play and maintain cutting precision
• Tilting legs
• Tilting movement for 45-degree angle cuts
• Supplied with a 350 mm diamond disc for ceramic tile

Specifications

• Brand: Raimondi
• Model: Mistral 120
• Product type: Wet tile saw
• 220V motor power: 3 HP
• 220V motor output: 2.2 kW
• 110V motor power: 2 HP
• 110V motor output: 1.5 kW
• Listed blade options: 350 mm or 300 mm
• Listed blade options in inches: 14 inches or 12 inches
• Maximum cutting depth: 100 mm
• Maximum cutting depth in inches: 4 inches
• Maximum rip-cut length: 120 cm
• Maximum rip-cut length in inches: 47-1/4 inches
• Maximum tile size for diagonal cutting: 85 x 85 cm
• Maximum diagonal tile size in inches: 33-1/2 x 33-1/2 inches
• Maximum angle cut: 45 degrees

Compatible Materials

• Granite
• Marble
• Porcelain
• Single-fired tile
• Double-fired tile
• Brick
• Cement materials

Included Component

• 350 mm, or 14-inch, diamond disc for ceramic tile

Configuration Note: The supplied product information lists different motor ratings for 220V and 110V models and identifies both 350 mm and 300 mm blade configurations. Confirm the voltage, motor and blade configuration before ordering.

Blade Note: The included diamond disc is identified for ceramic tile. Confirm that the installed blade is suitable for the specific material being cut.

Frequently Asked Questions

What is the maximum rip-cut length?

The Mistral 120 provides a maximum rip-cut length of 120 cm, or 47-1/4 inches.

What is the maximum diagonal tile size?

It can accommodate tile up to 85 x 85 cm, or 33-1/2 x 33-1/2 inches, for diagonal cutting.

What size blade does the saw use?

The supplied information lists 350 mm, or 14-inch, and 300 mm, or 12-inch, blade configurations. Confirm the exact model configuration before ordering.

What is the maximum cutting depth?

The listed maximum cutting depth is 100 mm, or 4 inches.

What motor does the saw have?

The 220V model is listed with a 3 HP, 2.2 kW motor, while the 110V model is listed with a 2 HP, 1.5 kW motor.

Can the Mistral 120 make angled cuts?

Yes. The saw tilts for 45-degree angle cuts.

Does the saw support plunge cutting?

Yes. Plunge-cut capability is included in the supplied product information.

What blade is included?

The supplied product information identifies a 350 mm, or 14-inch, diamond disc for ceramic tile as included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!