Raimondi Bolt 120 Wet Tile Saw

The Raimondi Bolt 120 Wet Tile Saw is designed for cutting granite, marble, porcelain, single-fired and double-fired tile, brick and cement materials.

This compact saw combines a 1.5 HP motor, 10-inch blade capacity and a 47-1/4-inch rip-cut length. It supports plunge cutting and tilts for 45-degree angle cuts.

Typical Applications

• Straight tile cutting
• Plunge cutting
• 45-degree angle cutting
• Diagonal cutting of tile up to 33-1/2 x 33-1/2 inches
• Cutting granite and marble
• Cutting porcelain and ceramic tile
• Cutting brick and cement materials

Advantages

• Aluminum sliding bar and columns
• Removable aluminum workbenches for easier cleaning
• Adjustable aluminum square
• Coated metal frame
• Plunge-cut capability
• Motor supported by a galvanized metal frame
• Motor travels on four polypropylene pulleys
• Each pulley is reinforced with two internal bearings
• Adjustable pulley system helps reduce play and maintain cutting precision
• Tilting legs
• Tilting movement for 45-degree angle cuts
• Includes a 250 mm diamond disc for ceramic tile

Specifications

• Brand: Raimondi
• Model: Bolt 120
• Product type: Wet tile saw
• Motor power: 1.5 HP
• Motor output: 1.1 kW
• Blade diameter: 250 mm
• Blade diameter in inches: 10 inches
• Maximum cutting depth: 55 mm
• Maximum cutting depth in inches: 2-1/8 inches
• Maximum rip-cut length: 120 cm
• Maximum rip-cut length in inches: 47-1/4 inches
• Maximum tile size for diagonal cutting: 85 x 85 cm
• Maximum diagonal tile size in inches: 33-1/2 x 33-1/2 inches
• Maximum angle cut: 45 degrees

Compatible Materials

• Granite
• Marble
• Porcelain
• Single-fired tile
• Double-fired tile
• Brick
• Cement materials

Included Component

• 250 mm, or 10-inch, diamond disc for ceramic tile

Blade Note: The included diamond disc is identified for ceramic tile. Confirm that the installed blade is suitable for the specific material being cut.

Frequently Asked Questions

What is the maximum rip-cut length?

The Bolt 120 provides a maximum rip-cut length of 120 cm, or 47-1/4 inches.

What is the maximum diagonal tile size?

It can accommodate tile up to 85 x 85 cm, or 33-1/2 x 33-1/2 inches, for diagonal cutting.

What size blade does the saw use?

The saw uses a 250 mm, or 10-inch, blade.

What is the maximum cutting depth?

The listed maximum cutting depth is 55 mm, or 2-1/8 inches.

Can the Bolt 120 make angled cuts?

Yes. The saw tilts for 45-degree angle cuts.

Does the saw support plunge cutting?

Yes. Plunge-cut capability is included in the supplied product information.

What blade is included?

The saw is supplied with a 250 mm, or 10-inch, diamond disc for ceramic tile.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!