Omni Cubed Miter-It V3, Single

The Omni Cubed Miter-It V3 is an easy-to-use jig designed for finished-side-up miter laminations. Keeping the finished surface facing up eliminates the need to flip the material for gluing, keeps the seam visible during lamination and helps reduce the risk of material damage.

The Miter-It securely holds drop-down edges at 90 degrees, eliminating the need for a helper to position the material. Its weight and non-marking, non-skid contact surfaces hold the workpiece and mitered edge in place without suction cups.

The upgraded V3 design is 4 inches longer than the previous version and accommodates mitered edges from 1 to 9 inches tall, depending on material thickness. Each single unit includes a free 25-yard sample roll of Kung Fu Tape.

Typical Applications

• Finished-side-up miter laminations
• Drop-down edge fabrication
• Holding mitered edges at 90 degrees
• Positioning material during gluing
• Mitered edge installation
• Applications where a helper would otherwise be needed to hold material

Advantages

• Allows finished-side-up miter fabrication
• Keeps the seam visible during lamination
• Eliminates the need to flip material for gluing
• Helps reduce awkward material handling
• Helps reduce the risk of damage to finished surfaces
• Holds drop-down edges securely at 90 degrees
• Eliminates the need for a helper to position the material
• Coarse and fine adjustments support accurate seam alignment
• Provides fast, easy miter adjustments
• More efficient than using tape alone
• Weighted design and non-skid contact points help hold the jig in place
• Non-marking contact surface protects the material
• No suction cups required
• Accommodates mitered edges from 1 to 9 inches tall, depending on material thickness

Specifications

• Brand: Omni Cubed
• Model: Miter-It V3
• Product type: Miter lamination jig
• Quantity: One jig
• Miter position: Finished side up
• Edge position: 90 degrees
• Adjustment types: Coarse and fine
• Supported miter-edge height: 1 to 9 inches, depending on material thickness
• V3 length update: 4 inches longer than the previous version
• Contact surface: Non-marking and non-skid
• Suction cups required: No
• Included accessory: 25-yard sample roll of Kung Fu Tape

How It Works

1. Position the countertop material with the finished side facing up.
2. Place the Miter-It where support is needed along the mitered edge.
3. Use the jig to hold the drop-down edge at 90 degrees.
4. Make coarse and fine adjustments to align the seam.
5. Complete the lamination while keeping the seam visible.

Frequently Asked Questions

What is the Omni Cubed Miter-It V3 used for?

It is used to hold and align drop-down edges during finished-side-up miter laminations.

Does the material need to be flipped for gluing?

No. The Miter-It V3 is designed to allow the material to remain finished side up during lamination.

What angle does the jig hold the mitered edge?

It holds the drop-down edge at 90 degrees.

Does the Miter-It require suction cups?

No. Its weight and non-marking, non-skid contact surfaces hold it in place without suction cups.

What miter-edge heights can it accommodate?

It accommodates mitered edges from 1 to 9 inches tall, depending on material thickness.

How is the V3 different from the previous version?

The upgraded V3 is 4 inches longer and can accommodate heavier materials and mitered edges from 1 to 9 inches tall, depending on material thickness.

Is tape included?

Yes. One free 25-yard sample roll of Kung Fu Tape is included.

How many Miter-It jigs are included?

This product is sold as a single unit.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!