Noble 210 Pro-Slope Subfloor, 40 x 40-Inch

The Noble 210 Pro-Slope Subfloor is a patented, preformed composite designed to create a consistent pre-slope beneath a waterproofing membrane in full mortar-bed shower applications.

The lightweight panel can be cut to fit and requires no mortar mixing or curing. According to the supplied product information, the properly sloped surface allows moisture to drain and helps reduce conditions that can contribute to mold, fungus and odor.

Notice: Must purchase case qty. of 6

Typical Applications

• Creating a pre-slope beneath shower waterproofing membranes
• Full mortar-bed shower installations
• Shower pan subfloor preparation

Advantages

• Preformed slope eliminates manual slope forming
• Allows moisture to drain toward the shower drain
• Helps reduce conditions that can contribute to mold, fungus and odor
• Lightweight and easy to cut to size
• Requires no mortar mixing
• Requires no curing time
• Made from durable, non-deteriorating EPS
• Rated for 500 pounds per square foot

Specifications

• Brand: Noble
• Product line: Pro-Slope
• Model: 210
• Product type: Preformed shower subfloor
• Dimensions: 40 x 40 inches
• Material: Expanded polystyrene (EPS)
• Application: Full mortar-bed installations
• Load rating: 500 pounds per square foot
• Mortar required to form slope: No
• Curing required: No

Installation Information

The Pro-Slope panel is installed beneath the waterproofing membrane to establish the required drainage slope for a full mortar-bed shower assembly. The lightweight EPS panel can be cut to fit the installation area.

Installation Note: Detailed cutting instructions, drain compatibility and fastening requirements were not included in the supplied product information.

Frequently Asked Questions

What is the Noble 210 Pro-Slope used for?

It is designed to create a pre-slope beneath a waterproofing membrane in full mortar-bed shower installations.

What size is the panel?

The panel measures 40 x 40 inches.

What material is it made from?

It is made from durable, non-deteriorating expanded polystyrene.

Does the slope require mortar?

No. The supplied product information states that no mortar mixing or curing is required to form the pre-slope.

Can the panel be cut to fit?

Yes. The lightweight panel is designed to be cut to the required size.

What is the listed load rating?

The panel is rated for 500 pounds per square foot.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!