NCF Quick Aerosol Accelerator, 6 Oz. (QA-6)

Please Note: This product may cause blooming on certain stones. Always perform a spot test before use.

NCF Quick Aerosol Accelerator speeds the curing of Hot Stuff cyanoacrylate adhesives during stone repair and fabrication. It allows the adhesive to cure within seconds, making it possible to trim excess material immediately when needed.

The accelerator is useful for repairing scratches and chips, filling gaps and bonding granite countertops. It helps prevent uncured adhesive from dripping during bonding applications and provides a faster alternative to allowing the glue to cure naturally.

Features and Benefits

• Speeds the curing of Hot Stuff cyanoacrylate adhesives
• Cures adhesive within seconds
• Allows excess adhesive to be trimmed immediately
• Useful for scratch, chip and gap repairs
• Helps prevent adhesive from dripping during granite bonding
• Aerosol application

Application Information

Apply the appropriate Hot Stuff adhesive to the repair area, spray with the accelerator and immediately remove excess adhesive with a razor blade when needed. The repaired area can then be lightly polished with extra-fine steel wool or a buffing pad.

Accelerator Comparison

• NCF Quick Accelerator (#16902): Provides faster curing but may discolor granite if over-applied.
• NCF Stone Accelerator (#16913): Cures significantly slower than NCF Quick Accelerator but is less prone to discoloring granite when over-applied.

Specifications

• Product: NCF Quick Aerosol Accelerator
• Model: QA-6
• Size: 6 oz.
• Container Type: Aerosol
• Application: Accelerating the cure of Hot Stuff cyanoacrylate adhesives

Warning: Avoid over-application. NCF Quick Accelerator may discolor granite and cause blooming on certain stones. Perform a spot test before beginning the repair.