Integra Surface Bonder Rapid Adhesive, Polar White 3080, 250 mL Kit

Integra Surface Bonder Rapid is a high-speed seaming adhesive developed for fabrication shops and installation crews that require faster working and fixture times. According to the manufacturer, it cures in approximately half the time of similar products to help improve shop productivity and reduce installation time.

The non-sag formula stays where it is applied, helping reduce drips, mess and wasted adhesive. It is suitable for mitered edges, deck seams and vertical applications. Its high-strength formula also supports use with thinner sheets where the adhesive contributes additional strength to the completed installation.

Surface Bonder Rapid is designed for natural stone, quartz, compact ceramics and porcelain surfaces, allowing fabricators to use one adhesive across multiple surface materials.

Typical Applications

• Mitered edges
• Deck seams
• Vertical applications
• Seaming natural stone
• Seaming quartz
• Seaming compact ceramic surfaces
• Seaming porcelain surfaces
• Bonding thinner surface materials

Advantages

• Fast-curing formula
• Working time of 4 to 8 minutes
• Fixture time of 10 to 16 minutes
• Non-sag consistency helps reduce drips and mess
• Suitable for horizontal and vertical applications
• High-strength bonding performance
• Designed for multiple natural and engineered surface materials
• Helps reduce the need to stock multiple adhesives
• Two-year shelf life

Specifications

• Brand: Integra Adhesives
• Product line: Surface Bonder Rapid
• Product type: High-speed seaming adhesive
• Color: Polar White 3080
• Kit size: 250 mL
• Mix ratio: 10:1
• Working time: 4 to 8 minutes
• Fixture time: 10 to 16 minutes
• Listed operating temperature: 65°F to 85°F, or 18°C to 30°C
• Adhesive viscosity: 20,000 to 50,000 cps
• Activator viscosity: 8,000 to 12,000 cps
• Adhesive color availability: Various
• Activator color: Colorless or translucent
• Natural stone flexural strength: Greater than 4,000 PSI or substrate failure
• Quartz flexural strength: Greater than 4,000 PSI or substrate failure
• Compact sintered material flexural strength: Greater than 4,000 PSI or substrate failure
• Shelf life: 2 years

Compatible Materials

• Natural stone
• Quartz
• Compact ceramics
• Porcelain
• Compact sintered materials

Temperature Considerations

The supplied product information lists an operating temperature range of 65°F to 85°F, or 18°C to 30°C. It also cautions that use outside the recommended temperature range may result in incomplete curing, yellowing or reduced bonding strength.

Frequently Asked Questions

What color is this Surface Bonder Rapid adhesive?

This kit is Polar White 3080.

What surfaces is the adhesive designed for?

It is designed for natural stone, quartz, compact ceramics, porcelain and compact sintered materials.

What is the working time?

The listed working time is 4 to 8 minutes.

What is the fixture time?

The listed fixture time is 10 to 16 minutes.

Can it be used for vertical applications?

Yes. Its non-sag formula is designed for vertical applications as well as mitered edges and deck seams.

What is the mixing ratio?

Surface Bonder Rapid uses a 10:1 mixing ratio.

What is the shelf life?

The listed shelf life is two years.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!