The Superabrasive GlossFire-F, formerly Toro F, is a resin-bond diamond polishing wheel designed for wet polishing straight and flat edges on granite and marble. It works with automated, multihead straight-edge shaping and polishing machines that use the popular snail-lock adapter.
The flat-edge polishing wheel helps optimize the production cycle by producing ready-to-install countertops in a single pass. It delivers a better finish and faster results while helping eliminate scratches at the ends of the workpiece.
GlossFire-F wheels work best with a maximum feed speed of 65 cm per minute and pressure of 4–5 bars. The product line is available in 4", 5", and 6" sizes with resin- or copper-bond options.
Compatible Machines
Marmoelettromeccanica
USG Machinery
Park Industries
Comandulli
Sasso
Breton
CMPI
Montresor
Omega
Other compatible machines
Recommended Polishing Sequences
5-Head Machines: Begin with 100-grit resin, followed by 200-, 500-, 1000-, and 2000-grit resin.
6-Head Machines: Begin with 100-grit resin, followed by 200-, 500-, 1000-, and 2000-grit resin and a resin buff wheel.
8-Head Machines: Begin with 100-grit copper, followed by 100-grit resin, 200-grit copper, and 200-, 500-, 1000-, and 2000-grit resin and a resin buff wheel.
9-Head Machines: Begin with 100-grit copper, followed by 50-grit resin, 100-grit resin, 200-grit copper, and 200-, 500-, 1000-, and 2000-grit resin and a resin buff wheel.
Note: For very rough surfaces or deep scratches, begin with copper-bond wheels.
Recommended Pressure Progression
Start at 29 PSI (2 bars) and increase the pressure by 3 PSI (0.2 bars) with each consecutive step. For example, set the machine to 29 PSI when beginning with 100 grit.
200 Grit: 32 PSI
500 Grit: 35 PSI
1000 Grit: 38 PSI
2000 Grit: 41 PSI
Buff: 44 PSI
Specifications
Brand: Superabrasive
Product Line: GlossFire-F, formerly Toro F
Product: Flat-edge polishing wheel
Diameter: 4"
Grit: 50
Bond: Resin
Connection: Snail lock
Operation: Wet polishing
Materials: Granite and marble
Maximum Feed Speed: 65 cm per minute
Recommended Pressure: 4–5 bars
Compatible Equipment: Automated, multihead straight-edge shaping and polishing machines
