Dust Eliminator, 5/8-Inch-11 Thread

The Dust Eliminator is designed to help control dust generated during wet stone grinding. It installs directly onto a compatible grinder and uses water-cooling technology to help reduce airborne stone dust during fabrication.

The hard-anodized unit provides a tight fit near the blade and is designed to add minimal weight to the grinder. It is compatible with wet grinder models that use a 5/8-inch-11 thread.

Typical Applications

• Wet stone grinding
• Stone fabrication shops
• Dust-control applications
• Grinding operations using water cooling
• Compatible wet grinders with a 5/8-inch-11 thread

Advantages

• Easy to install on a compatible grinder
• Designed to help eliminate dust generated during stone grinding
• Uses water-cooling technology
• Provides a tight fit near the blade
• According to the manufacturer, the nut is 30% lighter than existing nuts
• Designed to add minimal additional weight to the grinder
• Hard-anodized coating supports strength and durability
• Compatible with wet grinder models using a 5/8-inch-11 thread
• May reduce the need for large dust-collection equipment
• Water cooling may help extend grinder and blade life
• Includes a one-year factory warranty

Specifications

• Product type: Wet-grinding dust-control device
• Thread size: 5/8-inch-11
• Finish: Hard anodized
• Installation: Grinder mounted
• Operating method: Water cooling
• Compatibility: Wet grinders using a 5/8-inch-11 thread
• Listed weight comparison: 30% lighter than existing nuts
• Warranty: One-year factory warranty

Dust-Control and Safety Benefits

• Designed to reduce airborne dust during stone grinding
• According to the manufacturer, supports a dust-free stone fabrication environment
• According to the manufacturer, meets or exceeds applicable environmental department requirements
• Reducing stone-dust exposure can help limit risks associated with respiratory conditions such as lung inflammation, silicosis and chronic obstructive pulmonary disease

Frequently Asked Questions

What is the Dust Eliminator used for?

It is designed to help control dust generated during wet stone-grinding applications.

What thread size does it use?

The Dust Eliminator uses a 5/8-inch-11 thread.

How is it installed?

It installs directly onto a compatible wet grinder.

Is it compatible with every grinder?

The supplied product information identifies it as compatible with wet grinder models using a 5/8-inch-11 thread.

What is the purpose of the hard-anodized coating?

The hard-anodized coating is designed to increase the strength and durability of the unit.

Does it add significant weight to the grinder?

According to the manufacturer, the nut is 30% lighter than existing nuts and is designed to add minimal additional weight.

Can water cooling help protect the grinder and blade?

According to the supplied product information, the water-cooling technology can help extend the life of the grinder and blade.

What warranty is included?

The Dust Eliminator includes a one-year factory warranty.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!