Dry-Treat Stain-Proof Alkaline Cleaner, 2.2 Lbs.

Dry-Treat STAIN-PROOF Alkaline Cleaner, formerly known as Oxy-Klenza™, is an odorless, heavy-duty cleaner that combines oxygen, alkaline and detergent-boosted cleaning action. It removes general grime and stains caused by oil, grease, mold, leaf marks, food and beverages.

This concentrated powder cleaner is suitable for natural stone, tile, masonry, concrete, brick, grout, vinyl and raw, unfinished wood. It can also be mixed into a paste to create a poultice for removing heavy, old or deeply embedded stains.

Features and Benefits

• Triple-action foaming formula combines oxygen, alkaline and detergent-boosted cleaning
• Removes general grime and stains caused by oil, grease, mold, food, beverages and leaf marks
• Suitable for acid-sensitive, calcite-based stone such as marble and limestone
• Can be mixed into a poultice for removing heavy, old and dried-in stains
• Concentrated powder formula
• One 2.2 lb. bottle cleans up to 500 sq. ft.
• Suitable for indoor and outdoor applications
• Suitable for domestic and commercial cleaning

Typical Applications

Recommended for cleaning outdoor surfaces such as patios, building facades, decks, cladding, garages, driveways, and eating and entertaining areas.

• Natural stone, including marble and limestone
• Porcelain, ceramic and clay tile
• Brick, masonry, concrete and grout
• Vinyl
• Raw or unfinished wood without stain, oil or other coatings
• Artificial turf

Specifications

• Product: Dry-Treat STAIN-PROOF Alkaline Cleaner
• Former Name: Oxy-Klenza™
• Container Size: 2.2 lbs. (1 kg)
• Form: Powder concentrate
• Odor: Odorless
• Approximate pH: 11 when freshly mixed
• Approximate Coverage: Up to 500 sq. ft. (50 sq. m) per bottle
• Application Temperature: 40–95°F (5–35°C)
• Mixing Ratio: Approximately 1/3 bottle per 2 gallons (8 liters) of clean, warm water

Application Instructions

1. Always test the product on a small area before beginning the full application.
2. If satisfied with the test results, sweep or vacuum loose dust and dirt from the surface.
3. Apply when the surface temperature is between 40°F and 95°F (5°C and 35°C).
4. Thoroughly wet the surface.
5. Stir approximately 1/3 bottle of Alkaline Cleaner into an open plastic bucket containing approximately 2 gallons (8 liters) of clean, warm water until dissolved. Do not enclose the mixed solution because the container may rapidly expand, rupture and cause injury.
6. Apply the solution generously and leave it on the surface for three minutes. Do not allow the solution to dry. Clean large areas in sections and gently scrub with a white nylon scrub pad or brush.
7. Repeat the application if necessary.
8. Rinse the surface thoroughly with clean water.

Advanced Uses

• Mix with a small amount of water to create a poultice that holds the cleaning agent against the affected area and helps draw out deep countertop stains. Refer to the Poultice Cleaning Method guide for details.
• Use to clean artificial turf.
• To deodorize sink and tub drains, pour 1/2 cup down the drain while running warm tap water.
• To clean a toilet, sprinkle one cup into the bowl, allow it to sit for 30 minutes, scrub with a bowl brush and flush.

Environmental Qualification

Alkaline Cleaner qualifies for one point under LEED 2009 IEQ Credit 3.3: Green Cleaning—Purchase of Sustainable Cleaning Products and Materials.