Diamut T23 R3 FLX - Pos 5, ID 60 x 35 Bore, Flash Blue Polish Profile Wheel

The Diamut T23 R3 FLX Flash Blue Polish Profile Wheel is identified as a Position 5 CNC polishing wheel with an ID 60 x 35 bore designation. As part of the FLX tooling line, it is designed to round the top and bottom of slabs just shy of true 2 cm, 3 cm and 4 cm dimensions.

The FLX design features a 45° exit angle intended to bevel and polish the bottom side when the stone is thicker while helping avoid digging into the stone and leaving a lip.

Typical Applications

• CNC edge polishing
• Rounding the top and bottom of slabs
• Working with slab thicknesses just shy of true 2 cm, 3 cm and 4 cm
• Beveling and polishing the bottom side of thicker stone with a 45° exit angle

Advantages

• Position 5 polishing profile wheel
• Flash Blue polish designation
• FLX profile design
• 45° exit angle
• Precisely machined for precision and speed
• Tooling manufactured in-house by Diamut
• EDM by Diamut
• Made in Italy

Specifications

• Brand: Diamut
• Profile: T23 R3 FLX
• Position: 5
• Product type: Polish profile wheel
• Polish designation: Flash Blue
• ID / bore designation: 60 x 35
• Exit angle: 45°
• FLX slab thickness references: Just shy of true 2 cm, 3 cm and 4 cm
• Country of manufacture: Italy

FLX Profile Design

According to the supplied product information, Diamut FLX sets are designed to round both the top and bottom of slabs just shy of true 2 cm, 3 cm and 4 cm thicknesses. The 45° exit angle is designed to bevel and polish the bottom side when the material is thicker while helping prevent the tooling from digging into the stone and leaving a lip.

Product-Line Information

The supplied body copy also describes Diamut HYS2 Hyper Speed Solution tooling, DLG7 polishers and 5S diamond tooling. These details relate to the broader Diamut tooling system and are not all specifically confirmed for this T23 R3 FLX Position 5 Flash Blue Polish Profile Wheel.

• HYS2 Hyper Speed Solution tooling is described as being designed to increase CNC feed rates, with advertised speeds up to 12,700 mm/min or 500 inches/min.
• DLG7 polishers are described as using an updated resin matrix with an approximate break-in period of 50 to 100 linear feet and operation up to 2,570 mm/min or 100 inches/min.
• The 5S diamond is described as an ultra-fine metal position designed to produce a smoother edge before polishing, help reduce visible CNC machining lines and improve polisher life.
• Diamut tooling is available in 20 mm, 40 mm, 60 mm, 80 mm, 100 mm and 120 mm series.

Product Information Note: This exact listing is identified as Position 5 with a Flash Blue polish designation. The supplied body copy also discusses Position 5S diamond tooling, which is a different tooling designation and should not be treated as a specification for this Position 5 wheel.

Compatibility Note: Exact operating RPM, feed rate, compatible CNC machines, material compatibility and wet or dry operating requirements for this specific Position 5 FLX wheel were not included in the supplied product information. Confirm machine compatibility and operating parameters before use.

Frequently Asked Questions

What position is this Diamut profile wheel?

This listing identifies the wheel as Position 5.

What profile is listed?

The listed profile is T23 R3 FLX.

What polish designation does this wheel have?

The product title identifies it as a Flash Blue polish profile wheel.

What is the purpose of the FLX design?

The supplied product information states that FLX sets are designed to round the top and bottom of slabs just shy of true 2 cm, 3 cm and 4 cm dimensions.

What is the exit angle?

The FLX design uses a 45° exit angle intended to bevel and polish the bottom side of thicker stone.

What is the listed ID and bore designation?

The product title lists an ID / bore designation of 60 x 35. Additional dimensional clarification was not supplied.

Does the Position 5S information apply to this wheel?

No. The exact product is identified as Position 5. The 5S information relates to a different Diamut tooling designation.

Where is Diamut tooling made?

The supplied product information states that it is made in Italy.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!