Diamut AFR33 R6 R3 - Pos 7, ID 60 x 35 Bore, Flash Gray Polish Profile Wheel

The Diamut AFR33 R6 R3 Flash Gray Polish Profile Wheel is identified as a Position 7 CNC polishing wheel with an ID 60 x 35 bore designation. It is part of Diamut's professional profile tooling line and is manufactured in Italy.

Advantages

• Position 7 polishing profile wheel
• Flash Gray polish designation
• Precisely machined for precision and speed
• Tooling manufactured in-house by Diamut
• EDM by Diamut
• Made in Italy

Specifications

• Brand: Diamut
• Profile: AFR33 R6 R3
• Position: 7
• Product type: Polish profile wheel
• Polish designation: Flash Gray
• ID / bore designation: 60 x 35
• Country of manufacture: Italy

Product-Line Information

The supplied body copy also describes Diamut HYS2 Hyper Speed Solution tooling, FLX sets, DLG7 polishers and 5S diamond tooling. These details relate to the broader Diamut tooling system and are not all specifically confirmed for this AFR33 R6 R3 Position 7 Flash Gray Polish Profile Wheel.

• HYS2 Hyper Speed Solution tooling is described as being designed to increase CNC feed rates, with advertised speeds up to 12,700 mm/min or 500 inches/min.
• FLX sets are described as rounding the top and bottom of slabs just shy of true 2 cm, 3 cm and 4 cm, with a 45° exit angle designed to bevel and polish the bottom side when stone is thicker.
• DLG7 polishers are described as using an updated resin matrix with an approximate break-in period of 50 to 100 linear feet and operation up to 2,570 mm/min or 100 inches/min.
• The 5S diamond is described as an ultra-fine metal position designed to produce a smoother edge before polishing, help reduce visible CNC machining lines and improve polisher life.
• Diamut tooling is available in 20 mm, 40 mm, 60 mm, 80 mm, 100 mm and 120 mm series.

Product Information Note: This exact listing is identified as Position 7 with a Flash Gray polish designation. The supplied body copy also discusses Position 5S diamond tooling, which is a different tooling designation and should not be treated as a specification for this Position 7 wheel.

Compatibility Note: Exact operating RPM, feed rate, compatible CNC machines, material compatibility and wet or dry operating requirements for this specific Position 7 wheel were not included in the supplied product information. Confirm machine compatibility and operating parameters before use.

Frequently Asked Questions

What position is this Diamut profile wheel?

This listing identifies the wheel as Position 7.

What profile is listed?

The listed profile is AFR33 R6 R3.

What polish designation does this wheel have?

The product title identifies it as a Flash Gray polish profile wheel.

What is the listed ID and bore designation?

The product title lists an ID / bore designation of 60 x 35. Additional dimensional clarification was not supplied.

Does the Position 5S information apply to this wheel?

No. The exact product is identified as Position 7. The 5S information in the supplied body copy relates to a different Diamut tooling designation.

Where is Diamut tooling made?

The supplied product information states that it is made in Italy.

What operating speed should be used?

A specific operating speed or feed rate for this exact Position 7 Flash Gray wheel was not provided and should be confirmed before use.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!