Alpha Vetro Glass Blade, 10-Inch

The Alpha Vetro Glass Blade is designed for high-speed wet cutting of glass. Its smooth, continuous diamond rim and bond hardness are formulated for glass materials to support straight, accurate cuts with minimal chipping.

The blade is suitable for plunge cutting, trimming near glass edges and cutting internal radiuses. Its fine diamond matrix is also identified for cutting onyx.

Typical Applications

• Wet cutting of glass
• Cutting glass tile
• Plunge cutting
• Trimming near glass edges
• Cutting internal radiuses
• Cutting onyx

Advantages

• Designed specifically for high-speed wet cutting of glass
• Smooth, continuous diamond rim
• Bond hardness formulated for glass materials
• Designed to produce straight and accurate cuts
• Helps minimize chipping near glass edges
• Suitable for plunge cutting and internal-radius cutting
• Fine diamond matrix is suitable for onyx
• Designed for extended blade life
• According to the supplied product information, helps reduce material waste

Specifications

• Brand: Alpha
• Product line: Vetro
• Product type: Glass-cutting diamond blade
• Blade diameter: 10 inches
• Rim type: Smooth continuous diamond rim
• Operating method: Wet use only
• Primary application: Glass cutting

Compatible Materials

• Glass
• Glass tile
• Onyx

Operating Guidelines

The Alpha Vetro Blade must be used wet. Maintain an adequate water supply throughout the cutting process and follow the blade and equipment manufacturers' current operating instructions.

Wet-Use Requirement: This blade is designed for wet cutting only. Do not operate it dry.

Product-Line Information: The supplied description states that the 4-3/8-inch Alpha Vetro Blade can be used with the Alpha AWS-110 Wet Stone Cutter. That compatibility is not specifically confirmed for this 10-inch blade.

Compatibility Note: Arbor size, maximum RPM, cutting depth and compatible saw models were not included for this 10-inch blade. Confirm that the blade specifications match the intended wet-cutting equipment before use.

Frequently Asked Questions

What size is the Alpha Vetro Glass Blade?

This blade measures 10 inches in diameter.

What materials can it cut?

It is designed for glass and glass tile. The supplied product information also identifies its fine diamond matrix as suitable for cutting onyx.

Can the blade be used dry?

No. The Alpha Vetro Blade must be used wet.

Can it be used for plunge cutting?

Yes. Plunge cutting is listed as an intended application.

Can it trim close to glass edges?

Yes. The blade is designed for trimming near glass edges while helping minimize chipping.

Can it cut internal radiuses?

Yes. Cutting internal radiuses is identified as a suitable application.

Is the AWS-110 Wet Stone Cutter compatible with this blade?

The supplied information confirms AWS-110 compatibility only for the 4-3/8-inch Vetro Blade, not this 10-inch version. Confirm compatibility before ordering.

Is a wet saw or cutter included?

No. This listing is for the Alpha Vetro Glass Blade only. A wet saw, stone cutter and other equipment are not identified as included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!