Alpha Laminam Blade, 4-3/8-Inch

The Alpha Crossville Laminam Blade is designed for high-speed cutting of Laminam by Crossville and other compatible thin porcelain panels.

Its smooth, continuous diamond rim and bond hardness are designed for glass-type materials, helping produce straight, accurate cuts with minimal chipping. The blade is suitable for plunge cutting, trimming near edges and cutting internal radiuses.

Typical Applications

• Cutting Laminam by Crossville
• Cutting compatible thin porcelain tile and panels
• Plunge cutting
• Trimming near panel edges
• Cutting internal radiuses
• Wet cutting
• Dry cutting

Advantages

• Specially designed for Laminam by Crossville
• Suitable for compatible thin porcelain tile and panels
• Smooth, continuous diamond rim
• Bond hardness designed for glass-type materials
• Designed to produce straight and accurate cuts
• Helps minimize chipping, including near panel edges
• Suitable for plunge cuts, edge trimming and internal-radius cutting
• Can be used wet or dry
• Portable cutting solution
• Designed for extended blade life

Specifications

• Brand: Alpha
• Product line: Crossville Laminam
• Product type: Diamond cutting blade
• Blade diameter: 4-3/8 inches
• Rim type: Smooth continuous diamond rim
• Operating method: Wet or dry
• Primary application: Laminam and compatible thin porcelain panels

Compatible Materials

• Laminam by Crossville
• Compatible thin porcelain tile
• Compatible thin porcelain panels
• Glass-type materials supported by the blade's bond design

Performance Note: According to the supplied product information, the blade produces high-quality cuts with minimal chipping and helps reduce material waste.

Compatibility Note: Arbor size, maximum RPM, cutting depth and compatible saw or cutter models were not included in the supplied product information. Confirm that the blade specifications match the intended equipment and panel material before use.

Frequently Asked Questions

What size is the Alpha Laminam Blade?

This blade measures 4-3/8 inches in diameter.

What materials is it designed to cut?

It is designed for Laminam by Crossville and other compatible thin porcelain tile and panels.

Can the blade be used for plunge cutting?

Yes. The supplied product information identifies plunge cutting as an intended application.

Can it trim close to panel edges?

Yes. The blade is designed for trimming near edges while helping minimize chipping.

Can it cut an internal radius?

Yes. Cutting internal radiuses is listed as a suitable application.

Can the blade be used wet or dry?

Yes. The supplied product information identifies it for both wet and dry use.

Is a cutting tool included?

No. This listing is for the Alpha Laminam Blade only. A saw or cutting tool is not identified as included.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!