Alpha Black Belt Rail Saw, BBS-012, 115V

The Alpha Black Belt Rail Saw BBS-012 is a heavy-duty rail saw designed for tile installers, stone fabricators and hardscape contractors. It features a rugged aluminum table chassis, stainless steel head rails, adjustable armored ball bearings and a direct-drive cutting system.

The saw is designed for cutting ceramic, porcelain, glass panels and other compatible materials. A maintenance-free magnetic-induction water pump delivers water to both sides of the blade during operation.

Typical Applications

• Cutting ceramic
• Cutting porcelain
• Cutting glass panels
• Straight rip cuts
• Diagonal cuts
• Miter cuts up to 45 degrees
• Tile installation
• Stone fabrication
• Hardscape applications

Advantages

• Professional-quality heavy-duty rail saw
• Rugged aluminum table chassis for stable operation
• Direct-drive motor system
• Mechanical vertical tilting system for cutting-depth adjustment
• Stainless steel head rails
• Adjustable armored ball bearings for smooth movement
• Side-tilt capability up to 45 degrees for miter cutting
• Maintenance-free magnetic-induction water pump
• Water delivery to both sides of the blade
• Retractable legs with fall-protection device
• Table handles and heavy-duty wheels for transportation
• Front, rear and bilateral blade guards help minimize blade exposure and reduce water splash
• Maximum listed load of 400 lbs. (180 kg)

Specifications

• Brand: Alpha
• Product line: Black Belt
• Model: BBS-012
• Product type: Rail saw
• Title voltage: 115V
• Feature-section electrical specification: 115V, 60 Hz, 9.6 amp
• Feature-section motor: 2 HP (1.5 kW)
• Feature-section motor speed: 2,800 RPM
• Feature-section blade sizes: 10-inch and 12-inch
• Feature-section arbor sizes: 1 inch and 60 mm
• Maximum single-pass cutting depth: 2-1/4 inches
• Maximum step-cut depth: 3-3/8 inches
• Maximum side tilt: 45 degrees
• Maximum rip cut: 51 inches (130 cm)
• Maximum diagonal cut: 33 inches (84 cm)
• Maximum listed load: 400 lbs. (180 kg)
• Total weight: 128 lbs. (58 kg)
• Warranty listed: 1 year

Cutting & Adjustment Features

The cutting head uses a mechanical vertical tilting system to adjust cutting depth. The saw can cut up to 2-1/4 inches deep in a single pass and up to 3-3/8 inches using a step cut.

The cutting system also provides side-tilt capability up to 45 degrees for miter-cutting applications. Maximum listed cutting capacities are 51 inches (130 cm) for rip cuts and 33 inches (84 cm) for diagonal cuts.

Water Delivery System

A maintenance-free magnetic-induction water pump delivers water to both sides of the blade. Front, rear and bilateral blade guards are designed to reduce blade exposure and water splash during operation.

Mobility & Setup

• Retractable legs
• Fall-protection device on the legs
• Table handles
• Heavy-duty transport wheels

Product Information Note: The supplied product information contains conflicting electrical, motor and blade specifications. The introductory paragraph lists a 230V, 13.5-amp, single-phase, 3 HP (2.2 kW), 2,800 RPM motor that accepts 12-inch and 14-inch blades. The product title and feature list identify this BBS-012 as a 115V model, while the feature list specifies 115V, 60 Hz, 9.6 amp, 2 HP (1.5 kW), 2,800 RPM operation with 10-inch and 12-inch blades. Confirm the exact BBS-012 configuration before ordering or operating the saw.

Compatibility Note: The feature list identifies 10-inch and 12-inch blades with 1-inch and 60 mm arbors. Because the introductory copy lists different blade sizes, confirm the correct blade diameter and arbor configuration for this exact saw.

Important Load & Safety Note: The supplied product information lists a maximum load of 400 lbs. (180 kg). Do not exceed the rated capacity. Use the blade guards, water-delivery system and other safety features according to the manufacturer's instructions.

Frequently Asked Questions

What materials is the Alpha Black Belt Rail Saw designed to cut?

The supplied product information lists ceramic, porcelain, glass panels and other compatible materials.

What is the maximum rip-cut capacity?

The listed maximum rip cut is 51 inches, or 130 cm.

What is the maximum diagonal-cut capacity?

The listed maximum diagonal cut is 33 inches, or 84 cm.

How deep can the saw cut?

The feature section lists a maximum depth of 2-1/4 inches in a single pass and 3-3/8 inches with a step cut.

Can the saw make miter cuts?

Yes. The supplied product information lists side-tilt capability up to 45 degrees.

Does the saw include a water pump?

Yes. The supplied information identifies a maintenance-free magnetic-induction water pump that delivers water to both sides of the blade.

What voltage and motor does the BBS-012 use?

The title and feature section identify a 115V configuration, with the feature section specifying 9.6 amps and a 2 HP (1.5 kW) motor. However, the introductory paragraph lists a conflicting 230V, 13.5-amp, 3 HP configuration. Confirm the exact specifications before use.

What blade sizes does it accept?

The feature section lists 10-inch and 12-inch blades, while the introductory paragraph lists 12-inch and 14-inch blades. Confirm the correct blade size for this exact BBS-012 configuration.

What is the listed warranty?

The supplied product information lists a one-year tool warranty.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!