Adjustable Better Bench, 14-1/2-Inch Depth x 33-1/2 to 62-Inch Width, BBADJR

The Adjustable Better Bench BBADJR is a self-supporting bench-forming system designed to simplify the construction of a custom tiled shower bench. Its telescoping frame adjusts from 33-1/2 to 62 inches wide to accommodate a range of shower openings.

Constructed from corrosion-resistant alloyed aluminum, the bench mounts directly to most vertical surfaces without requiring additional framing, blocking or structural reinforcement. It can be installed before or after finish tile is applied.

After mounting and adjusting the frame, fill the cavity with a mortar mixture of sand and cement, then apply tile and grout to coordinate with the surrounding shower.

Typical Applications

• Walk-in showers
• Residential shower remodeling
• Commercial shower installations
• Tile and natural stone showers
• Custom shower renovations
• Wet or dry installations

Advantages

• Adjustable width from 33-1/2 to 62 inches
• Engineered 400-pound load capacity
• Self-supporting alloyed aluminum frame
• Can be installed before or after finish tile is applied
• No studs, blocking or additional structural framing required
• According to the supplied product information, no additional waterproofing is required over the bench
• Mounts over U.B.C.-approved substrate materials
• Suitable for wet or dry locations
• Corrosion-resistant construction
• Includes six 3/16-inch hollow-wall fasteners
• Manufactured in the USA

Specifications

• Brand: Better-Bench
• Model: BBADJR
• Product type: Adjustable tiled shower bench system
• Bench depth: 14-1/2 inches
• Adjustable width: 33-1/2 to 62 inches
• Engineered load capacity: 400 pounds
• Material: Alloyed aluminum
• Installation type: Wall mounted
• Recommended locations: Wet or dry
• Compatible surfaces: U.B.C.-approved substrate materials
• Included fasteners: Six 3/16-inch hollow-wall fasteners
• Country of manufacture: USA

Installation Guidelines

1. Adjust the frame to the required width between 33-1/2 and 62 inches.
2. Mount the frame to the wall using the supplied hollow-wall fasteners.
3. Fill the frame cavity with a mortar mixture of sand and cement.
4. Install tile over the mortar surface.
5. Grout and finish the bench to coordinate with the surrounding shower.

Construction Tip: No. 12 x 2-1/2-inch wood screws may be required for some installations, depending on the wall construction. These screws are not included with the Better Bench kit.

Included Components

• One Adjustable Better Bench BBADJR frame
• Six 3/16-inch hollow-wall fasteners

Frequently Asked Questions

What width can the Adjustable Better Bench accommodate?

The frame adjusts from 33-1/2 to 62 inches wide.

What is the depth of the bench?

The bench is 14-1/2 inches deep.

What is the engineered load capacity?

The supplied product information lists an engineered load capacity of 400 pounds.

Can the bench be installed after the shower walls are tiled?

Yes. It can be installed before or after finish tile is applied to the vertical surfaces.

Are wall studs or blocking required?

No. The supplied product information states that the system does not require studs, blocking or additional structural framing.

Can the bench be used in wet locations?

Yes. It is designed for wet or dry locations.

Are No. 12 x 2-1/2-inch wood screws included?

No. These screws may be needed for some installations but are not included with the kit.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!