The ADA-Compliant Countertop Support is designed for mounting wall vanities, desks and natural stone countertops that require wheelchair-accessible clearance. The support can be installed at an appropriate height to provide access for wheelchair users.
Made in the USA from 16-gauge powder-coated mild steel, each bracket has a listed weight rating of 500 lb. The support is intended to be concealed with stone, laminated panels or another suitable enclosure.
Typical Applications
Wheelchair-accessible countertops
Wall-mounted vanities
Wall-mounted desks
Natural stone countertop installations
Applications requiring open knee clearance
Concealed countertop support installations
Advantages
Designed for ADA-compliant countertop applications
Supports wheelchair-accessible vanity and desk installations
500 lb. listed weight rating per bracket
16-gauge mild-steel construction
Powder-coated finish
Can be concealed with stone or laminated panels
Made in the USA
Specifications
Product type: Countertop support bracket
Material: 16-gauge mild steel
Finish: Powder coated
Weight rating: 500 lb. per bracket
Screw-hole thread size: 1/4-inch-20
Maximum spacing between brackets: 30 inches
Maximum recommended overhang: 4 inches
Installation requirement: Attach brackets to studs
Intended installation: Concealed
Country of manufacture: USA
Recommended Bracket Quantities
4-foot span: Two brackets
5-foot span: Three brackets
8-foot span and larger: Four or more brackets with compliant spacing
Mounting Guidelines
For wooden studs, the recommended fastener is a 5/16-inch x 2-inch lag screw
For metal studs, use an equivalent fastener such as a bolt and nut
Metal screws are not recommended
Mount each bracket securely into a stud or another suitable structural support
Maintain no more than 30 inches between brackets on any span
Do not use more than 4 inches of overhang at any point
Mounting holes for apron and fascia panels will depend on the width of the project
End panels may be used depending on the application
ADA Installation Guidelines
According to the supplied installation guidelines, sinks should be mounted no higher than 34 inches from the floor. The installation should maintain knee clearance measuring 27 inches high by 30 inches wide at a depth of 11 to 25 inches.
All installations must meet applicable building codes and current ADA requirements. A secure mounting platform is required to provide proper support and reduce the risk of installation failure or injury.
Frequently Asked Questions
What is this countertop support designed for?
It is designed for wall-mounted vanities, desks and countertops that require wheelchair-accessible knee clearance.
What is the weight rating?
Each bracket has a listed weight rating of 500 lb.
How far apart can the brackets be installed?
The supplied installation guidelines specify no more than 30 inches between brackets.
How should the bracket be mounted to a wooden stud?
The recommended mounting method is to use 5/16-inch x 2-inch lag screws secured into a wooden stud.
Can the bracket be mounted to a metal stud?
Yes. Use an equivalent fastener such as a bolt and nut. A metal screw is not recommended.
How much countertop overhang is recommended?
The support is not recommended for installations with more than 4 inches of overhang at any point.
Is the bracket intended to remain visible?
No. The support is intended to be concealed with stone, laminated panels or another suitable enclosure.
BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.
