Abaco 50 Stone Vacuum Lifter, 2 Vacuum Cups (SVL50)

The Abaco 50 Stone Vacuum Lifter, model SVL50, is a mid-size vacuum lifter designed for lifting, moving and installing large stone slabs. It is equipped with two vacuum cups and provides an inclination range from 0 to 90 degrees.

The SVL50 requires 11 PSI (0.7-0.8 bar) of air pressure for operation. According to the supplied product information, this allows the lifter to operate with many commonly available compressors without requiring a generator.

Typical Applications

• Lifting large stone slabs
• Moving stone slabs
• Installing large stone slabs
• Tilting slabs from 0 to 90 degrees

Advantages

• Designed for lifting, moving and installing large-size slabs
• 2 vacuum cups
• Inclination range from 0 to 90 degrees
• Rubber suction pads help protect slabs from scratching
• Vacuum suction is designed to maintain slab stability during lifting
• Requires only 11 PSI (0.7-0.8 bar) of operating air pressure
• According to the supplied product information, does not require a generator

Specifications

• Brand: Abaco
• Product: Abaco 50 Stone Vacuum Lifter
• Model: SVL50
• Product type: Stone vacuum lifter
• Vacuum cups: 2
• Minimum stone dimensions: 44-1/8 x 24-3/8 inches
• Inclination range: 0-90 degrees
• Maximum listed lifting capacity: Slightly over 1,100 lbs.
• Required air pressure: 11 PSI (0.7-0.8 bar)
• Suction pad material: Rubber

Operating Requirements

The supplied product information specifies an operating air pressure requirement of 11 PSI (0.7-0.8 bar). According to the manufacturer information provided, many commonly available compressors can supply the required pressure.

Important Load & Safety Note: The supplied product information lists a maximum lifting capability of slightly over 1,100 lbs. for the SVL50 and minimum stone dimensions of 44-1/8 x 24-3/8 inches. Do not exceed the applicable rated capacity, and confirm that the slab dimensions and surface are suitable for the vacuum cups before lifting.

Operating Notice: Read and understand the owner's manual before operating the vacuum lifter to help prevent equipment damage or bodily injury.

Product-Line Information

The supplied information also identifies two additional Abaco Stone Vacuum Lifters:

• Abaco 25, model SVL25: 1 vacuum cup, minimum stone dimensions of 24-3/8 x 16-3/8 inches, 0-90 degree inclination and maximum lifting capacity of 550 lbs.
• Abaco 100, model SVL100: 4 vacuum cups, minimum slab dimensions of 52 x 28-3/8 inches, 0-90 degree inclination and maximum safe lifting capacity of 2,200 lbs.

Product Information Note: The specifications above for the Abaco 25 and Abaco 100 apply to other models in the product family and not to this SVL50 listing.

Frequently Asked Questions

How many vacuum cups does the Abaco SVL50 have?

The SVL50 is equipped with two vacuum cups.

What is the maximum listed lifting capacity?

The supplied product information states that the SVL50 has a maximum lifting capability of slightly over 1,100 lbs.

What are the minimum stone dimensions?

The minimum listed stone dimensions are 44-1/8 x 24-3/8 inches.

Can the lifter tilt the slab?

Yes. The supplied product information lists an inclination range from 0 to 90 degrees.

How much air pressure does the SVL50 require?

The listed requirement is 11 PSI, or 0.7-0.8 bar.

Does the lifter require a generator?

According to the supplied product information, no generator is required. The lifter operates from compressed air.

Do the vacuum cups help protect the stone surface?

Yes. The supplied product information states that the rubber suction pads help protect the slab from scratching.

BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.

BB Industries has you covered!